Control Terminal Specification - Emerson Powerdrive F300 User Manual

Safety Product Mechanical
information information installation
4.12.2

Control terminal specification

1 0V common
Function
2 +24V external input
Function
Programmability
Nominal voltage
Minimum continuous operating
voltage
Maximum continuous operating
voltage
Minimum start-up voltage
Recommended power supply
Recommended fuse
3 +24 V user output (selectable)
Terminal 3 default function
Programmability
Nominal output current
Maximum output current
Protection
Sample / update period
4 0V common
Function
Powerdrive F300 User Guide
Issue Number: 2
Electrical Getting Basic
installation started parameters the motor
Common connection for all external
devices
To supply the control circuit
without providing a supply to the
power stage
Can be switched on or off to act as a digital
input by setting the source Pr 08.063 and
input invert Pr 08.053
+24.0 Vdc
+19.2 Vdc
+28.0 Vdc
21.6 Vdc
40 W 24 Vdc nominal
3 A, 50 Vdc
+24 V user output
Can be switched on or off to act as a fourth
digital output (positive logic only) by setting
the source Pr 08.028 and source invert
Pr 08.018
100 mA combined with DIO3
100 mA
200 mA (total including all Digital I/O)
Current limit and trip
2 ms when configured as an output (output
will only change at the update rate of the
source parameter if slower)
Common connection for all external
devices
Running NV Media Card
Optimization
Operation
5 Analog input 1
6
Analog input 2
Terminal 5 Default function
Terminal 6 Default function
Type of input AI 1 [AI 2]
Mode controlled by...
Operating in current mode (Default for terminal 5)
Current ranges
Maximum offset
Absolute maximum voltage
(reverse bias)
Absolute maximum current
Equivalent input resistance
Operating in voltage mode (Default for terminal 6)
Full scale voltage range
Maximum offset
Absolute maximum voltage range
Input resistance
Common to all modes
Resolution
Sample / update
Operating in thermistor input mode
Voltage range
Supported thermistor types
Internal pull-up voltage 5 V
Trip threshold resistance
Reset resistance
Short-circuit detection resistance
Common to all modes
Resolution
Sample / update period
Onboard Advanced Technical
Diagnostics
PLC parameters data
Frequency / speed reference
(Pr 1.036)
Frequency / speed reference
(Pr 1.037)
Unipolar current and Bipolar single-ended
analog voltage
Pr 07.007 [07.011]
0 to 20 mA ±5 %, 20 to 0 mA ±5 %,
4 to 20 mA ±5 %, 20 to 4 mA ±5 %
250 μA
±36 V relative to 0V
±30 mA
≤ 300 Ω
±10 V ±2 %
±10 mV
±36 V relative to 0 V
≥100 k Ω
12 bits (11 bits plus sign)
250 µs with destinations Pr 01.036 ,
Pr 01.037 or Pr 03.022, Pr 04.008 in RFC-A
or RFC-S. 4 ms for open loop mode and all
other destinations in RFC-A or RFC-S
mode.
±10 V ±2 %
Din 4408, KTY 84, PT100, PT 1000,
PT 2000, NI 1000
User defined in Pr 07.055 [07.060]
User defined in Pr 07.056 [07.061]
50 Ω ± 40 %
12 bits (11 bits plus sign)
4 ms
UL listing
information
99