Removing The Size 3 Terminal Covers; Removing The Size 4 Terminal Covers - Emerson Powerdrive F300 User Manual

Safety Product Mechanical Electrical Getting Basic Running NV Media Card Onboard Advanced Technical UL listing
Optimization Diagnostics
information information installation installation started parameters the motor Operation PLC parameters data information
Figure 3-5 Removing the size 3 terminal covers
1. Control / AC / Motor terminal cover
2. DC cover
On size 3 drives, the Control / AC / Motor terminal cover must be removed before removal of the DC / Terminal cover. When replacing the terminal
covers, the screws should be tightened to a maximum torque of 1 N m (0.7 lb ft).
Figure 3-6 Removing the size 4 terminal covers
2
1
1. Control / AC / Motor terminal cover
2. DC cover
On size 4 drives, the Control / AC / Motor terminal cover must be removed before removal of the DC / Terminal cover. When replacing the terminal
covers, the screws should be tightened to a maximum torque of 1 N m (0.7 lb ft).
26
Powerdrive F300 User Guide
Issue Number: 2