Supply And Ground Cable Clearance; Sensitive Signal Circuit Clearance; Grounding The Drive, Motor Cable Shield And Filter - Emerson Powerdrive F300 User Manual

Safety Product Mechanical
information information installation
Figure 4-37 Supply and ground cable clearance (size 7 onwards)
Ensure the AC supply and ground cables are at least 100 mm from the
power module and motor cable.
Figure 4-38 Sensitive signal circuit clearance
Avoid placing sensitive signal circuits in a zone 300 mm (12 in) in the
area immediately surrounding the power module. Ensure good EMC
grounding.
Powerdrive F300 User Guide
Issue Number: 2
Electrical Getting Basic
installation started parameters the motor
100mm (4in)
100mm
(4in)
100mm (4in)
≥300 mm
(12 in)
Sensitive
signal
cable
Running NV Media Card
Optimization
Operation
Figure 4-39 Grounding the drive, motor cable shield and filter
Motor cable shield
(unbroken) electrically
connected to and held
in place by grounding
clamp.
Connect the shield of the motor cable to the ground terminal of the motor
frame using a link that is as short as possible and not exceeding 50 mm
(2 in) long.
Onboard Advanced Technical
Diagnostics
PLC parameters data
UL listing
information
Ensure direct
metal contact
at drive and
filter mounting
points (any
paint must be
removed).
95