Menu Structure; Menu 0; Parameter Navigation; Menu 0 Copying - Emerson Powerdrive F300 User Manual

Safety Product Mechanical
information information installation
5.3

Menu structure

The drive parameter structure consists of menus and parameters.
The drive initially powers up so that only Menu 0 can be viewed. The up
and down arrow buttons are used to navigate between parameters and
once Pr 00.049 has been set to 'All Menus' the left and right buttons are
used to navigate between menus. For further information, refer to
section 5.9 Parameter access level and security on page 109
Figure 5-5 Parameter navigation
*
* Can only be used to move between menus if all menus have
been enabled (Pr 00.049). Refer to section 5.9 Parameter
access level and security on page 109.
The menus and parameters roll over in both directions.
i.e. if the last parameter is displayed, a further press will cause the
display to rollover and show the first parameter.
When changing between menus the drive remembers which parameter
was last viewed in a particular menu and thus displays that parameter.
Figure 5-6 Menu structure

Menu 0

....MM.000....
00.050
00.049
00.048
00.047
00.046
00.005
00.004
00.003
00.002
00.001
Moves between Menus
* The option module menus (S.mm.ppp) are only displayed if option
modules are installed. Where S signifies the option module slot number
and the mm.ppp signifies the menu and the parameter number of the
option module's internal menus and parameter.
106
Electrical Getting Basic
installation started parameters the motor
*
Moves
between
parameters
Running NV Media Card
Optimization
Operation
5.4 Menu 0
Menu 0 is used to bring together various commonly used parameters for
basic easy set up of the drive. The parameters displayed in Menu 0 can
be configured in Menu 22.
Appropriate parameters are copied from the advanced menus into Menu
0 and thus exist in both locations.
For further information, refer to Chapter 6 Basic parameters on
page 111.
Figure 5-7 Menu 0 copying
Menu 0
00.004 5
00.005 0
00.006 150
Onboard Advanced Technical
Diagnostics
PLC parameters data
Menu 2
02.021 5
Menu 4
150
04.007
Powerdrive F300 User Guide
UL listing
information
Menu 1
01.014 0
Issue Number: 2