Nv Media Card Parameters; Key To Parameter Table Coding - Emerson Powerdrive F300 User Manual

Safety Product Mechanical
information information installation
9.5

NV Media Card parameters

Table 9-2 Key to parameter table coding
RW Read / Write
RO Read only
Num Number parameter
Bit Bit parameter
Txt Text string
Bin Binary parameter
FI Filtered
11.036 {00.029} NV Media Card File Previously Loaded
RO Num
OL
RFC-A 0 to 999
RFC-S
This parameter shows the number of the data block last transferred from
a NV Media Card to the drive. If defaults are subsequently reloaded this
parameter is set to 0.
11.037 NV Media Card File Number
RW Num
OL
RFC-A 0 to 999
RFC-S
This parameter should have the data block number which the user would
like the information displayed in Pr 11.038, Pr 11.039 and Pr 11.040.
11.038 NV Media Card File Type
RO Txt
OL
None (0), Open-loop (1),
RFC-A (2), RFC-S (3),
RFC-A
Regen (4), User Prog (5),
Option App (6)
RFC-S
Displays the type/mode of the data block selected with Pr 11.037.
Pr 11.038 String
0 None
1 Open-loop
2 RFC-A
3 RFC-S
4 Regen
5 User Prog
6 Option App
11.039 NV Media Card File Version
RO Num
OL
RFC-A 0 to 9999
RFC-S
Displays the version number of the file selected in Pr 11.037.
Powerdrive F300 User Guide
Issue Number: 2
Electrical Getting Basic
installation started parameters the motor
ND No default value
NC Not copied
PT Protected parameter
RA Rating dependant
US User save
PS Power-down save
DE Destination
NC PT
0
0
ND NC PT
Type / mode
No file selected
Open-loop mode parameter file
RFC-A mode parameter file
RFC-S mode parameter file
Regen mode parameter file
Onboard user program file
Option module application file
ND NC PT
Running NV Media Card
Optimization
Operation
11.040
RO Num
OL
--2147483648 to
RFC-A
RFC-S
Displays the checksum of the data block selected in Pr 11.037.
11.042
RW Txt
OL
None (0), Read (1),
RFC-A Program (2), Auto (3),
RFC-S
* Only a value of 3 or 4 in this parameter is saved.
NOTE
If Pr 11.042 is equal to 1 or 2, this value is not transferred to the drive or
saved to the EEPROM. If Pr 11.042 is set to 3 or 4 the value is saved to
the EEPROM
None (0) = Inactive
Read (1) = Read parameter set from the NV Media Card
Program (2) = Program a parameter set to the NV Media Card
Auto (3) = Auto save
Boot (4) = Boot mode
11.072
RW Num
OL
RFC-A
RFC-S
If NV Media Card Create Special File (11.072) = 1 when a parameter file
is transferred to an NV media card the file is created as a macro file. NV
Media Card Create Special File (11.072) is reset to 0 after the file is
created or the transfer fails.
11.073
RO Txt
OL
RFC-A SMART Card (1),
RFC-S
This will display the type of media card inserted; it will contain one of the
following values:
"None" (0) - No NV Media Card has been inserted.
"SMART Card" (1) - A SMARTCARD has been inserted.
"SD Card" (2) - A FAT formatted SD card has been inserted.
11.075
RO Bit
OL
RFC-A Off (0) or On (1)
RFC-S
NV Media Card Read-only Flag (11.075) shows the state of the read-
only flag for the currently installed card.
Onboard Advanced Technical
PLC parameters data
NV Media Card File Checksum
ND NC
2147483647
Parameter Cloning
NC
Boot (4)
NV Media Card Create Special File
NC
0 to 1
NV Media Card Type
ND NC
None (0),
SD Card (2)
NV Media Card Read-only Flag
ND NC
UL listing
Diagnostics
information
PT
US*
None (0)
0
PT
PT
165