Using The Keypads - Christie Roadster S+ User Manual

OPERATION
3.3 Using the
Keypads
Built-in
3-4
Roadster/Mirage S+ User's Manual
LCD STATUS DISPLAY WINDOW -
current system status (such as an error). During normal operation, this display
indicates Power On and includes the frequencies of the vertical and horizontal
syncs. The display also shows if the On Screen Display (OSD, or menu system)
is on or off. The LCD displays the message Power Off when the breaker is on
but the lamp is off.
Keypads / Sensors
WIRED REMOTE KEYPAD CONNECTOR -
the projector.
BUILT-IN KEYPAD -
INFRARED SENSORS -
projector receive infrared signals from the IR keypad for remote control of
projector functions. For proper operation, make sure that these sensors are not
blocked.
Using one of the following keypads typically controls the projector:
•
Built-in Keypad at the rear of the projection head
•
Remote Keypad for tethered or tetherless control (includes cable for
connecting as a wired remote)
While each of the keypads provides complete control of the projector, they differ
slightly in their arrangement of keys and in which functions can be accessed directly
with a key press rather than requiring use of the menu system. You may find one
keypad more convenient than another for your specific installation and application.
To control the projector
'
when signals from a
remote keypad cannot
reach the projector, use
the projector's built-in
keypad (Figure 3.2). Two
nearby status windows
provide feedback
indicating current status and activities of the projector. Because the built-in keypad
has fewer keys than the remote keypad, certain projector functions are accessible
only through the menu system rather than via a direct key.
NOTE: The built-in keypad cannot be disabled
Displays a text message describing the
For optional tethered remote control of
Alternative location for working with the projector.
The infrared (IR) sensors on the front and rear of the
Figure 3.2. Built-in Keypad at Projector Rear