Ied Identifiers Terminalid; Identification; Functionality; Settings - ABB REG650 Technical Manual

Section 16
Basic IED functions
16.7
16.7.1
16.7.2
16.7.3
Table 420: TERMINALID Non group settings (basic)
Name
StationName
StationNumber
ObjectName
ObjectNumber
UnitName
Table continues on next page
502
• Reset LEDs
• Reset counters and other runtime component states
• Control operations
• Set system time
• Enter and exit from test mode
• Change of active setting group
The binary input signal LOCK controlling the function is defined in ACT or SMT:
Binary input
1
0

IED identifiers TERMINALID

Identification

Function description
IED identifiers

Functionality

IED identifiers (TERMINALID) function allows the user to identify the individual
IED in the system, not only in the substation, but in a whole region or a country.
Use only characters A-Z, a-z and 0-9 in station, object and unit names.

Settings

Values (Range) Unit
0 - 18 -
0 - 99999 -
0 - 18 -
0 - 99999 -
0 - 18 -
Function
Activated
Deactivated
IEC 61850
identification
TERMINALID
Step Default
1 Station name
1 0
1 Object name
1 0
1 Unit name
1MRK 502 034-UEN -
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
Description
Station name
Station number
Object name
Object number
Unit name
Technical Manual