Technical Data; Parameter Setting Group Handling; Functionality; Setting Group Handling Setgrps - ABB REG650 Technical Manual

1MRK 502 034-UEN -
16.3.9
16.4
16.4.1
16.4.2
16.4.2.1
16.4.2.2
Table 412: SETGRPS Non group settings (basic)
Name Values (Range)
ActiveSetGrp
MaxNoSetGrp
Technical Manual
Synchronization via IEC60870-5-103
The IEC60870-5-103 communication can be the source for the course time
synchronization, while the fine time synchronization needs a source with higher
accuracy. See the communication protocol manual for a detailed description of the
IEC60870-5-103 protocol.

Technical data

Table 411: Time synchronization, time tagging
Function
Time tagging resolution, events and sampled measurement values
Time tagging error with synchronization once/min (minute pulse
synchronization), events and sampled measurement values
Time tagging error with SNTP synchronization, sampled
measurement values

Parameter setting group handling

Functionality

Use the four sets of settings to optimize the IED operation for different system
conditions. Creating and switching between fine-tuned setting sets, either from the
local HMI or configurable binary inputs, results in a highly adaptable IED that can
cope with a variety of system scenarios.

Setting group handling SETGRPS

Identification

Function description
Setting group handling

Settings

Unit
SettingGroup1 -
SettingGroup2
SettingGroup3
SettingGroup4
1 - 4 -
IEC 61850
identification
SETGRPS
Step Default
- SettingGroup1
1 1
Section 16
Basic IED functions
Value
1 ms
± 1.0 ms typically
± 1.0 ms typically
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
Description
ActiveSettingGroup
Max number of setting groups 1-4
495