Denial Of Service, Frame Rate Control For Lan1 Port Doslan1; Identification; Function Block; Signals - ABB REG650 Technical Manual

1MRK 502 034-UEN -
16.15.3
16.15.3.1
16.15.3.2
16.15.3.3
16.15.3.4
16.15.3.5
Technical Manual

Denial of service, frame rate control for LAN1 port DOSLAN1

Identification

Function description
Denial of service, frame rate control for
LAN1 port

Function block

DOSLAN1
LINKUP
WARNING
ALARM
IEC09000134-1-en.vsd
IEC09000134 V1 EN
Figure 250: DOSLAN1 function block

Signals

Table 439: DOSLAN1 Output signals
Name Type
LINKUP BOOLEAN
WARNING BOOLEAN
ALARM BOOLEAN

Settings

The function does not have any parameters available in the local HMI or PCM600.

Monitored data

Table 440: DOSLAN1 Monitored data
Name Type
State INTEGER
Quota INTEGER
IPPackRecNorm INTEGER
Table continues on next page
Basic IED functions
IEC 61850 IEC 60617
identification identification
DOSLAN1
Description
Ethernet link status
Frame rate is higher than normal state
Frame rate is higher than throttle state
Values (Range) Unit
0=Off -
1=Normal
2=Throttle
3=DiscardLow
4=DiscardAll
5=StopPoll
- %
- -
Section 16
ANSI/IEEE C37.2
device number
- -
Description
Frame rate control state
Quota level in percent
0-100
Number of IP packets
received in normal mode
517