Signals; Settings; Monitored Data - ABB REG650 Technical Manual

1MRK 502 034-UEN -
13.6.2.3
13.6.2.4
Table 315: DRPRDRE Non group settings (basic)
Name Values (Range)
Operation
PreFaultRecT
PostFaultRecT
TimeLimit
PostRetrig
MaxNoStoreRec
ZeroAngleRef
OpModeTest
13.6.2.5
Technical Manual

Signals

Table 314: DRPRDRE Output signals
Name
DRPOFF
RECSTART
RECMADE
CLEARED
MEMUSED

Settings

Unit
Off -
On
0.05 - 3.00 s
0.1 - 10.0 s
0.5 - 8.0 s
Off -
On
10 - 100 -
1 - 30 Ch
Off -
On

Monitored data

Table 316: DRPRDRE Monitored data
Name
MemoryUsed
UnTrigStatCh1
OvTrigStatCh1
UnTrigStatCh2
OvTrigStatCh2
UnTrigStatCh3
Table continues on next page
Type Description
BOOLEAN Disturbance report function turned off
BOOLEAN Disturbance recording started
BOOLEAN Disturbance recording made
BOOLEAN All disturbances in the disturbance report cleared
BOOLEAN More than 80% of memory used
Step Default
- Off
0.01 0.10
0.1 0.5
0.1 1.0
- Off
1 100
1 1
- Off
Type Values (Range)
INTEGER -
BOOLEAN -
BOOLEAN -
BOOLEAN -
BOOLEAN -
BOOLEAN -
Section 13
Monitoring
Description
Operation Off/On
Pre-fault recording time
Post-fault recording time
Fault recording time limit
Post-fault retrig enabled (On) or not (Off)
Maximum number of stored disturbances
Trip value recorder, phasor reference
channel
Operation mode during test mode
Unit Description
% Memory usage (0-100%)
- Under level trig for
analog channel 1
activated
- Over level trig for analog
channel 1 activated
- Under level trig for
analog channel 2
activated
- Over level trig for analog
channel 2 activated
- Under level trig for
analog channel 3
activated
385