1MRK 502 034-UEN -
13.19.4
Table 356:
I103EF Non group settings (basic)
Name
Values (Range)
FunctionType
13.20
13.20.1
Technical Manual
Settings
Unit
1 - 255
-
Function status fault protection for IEC 60870-5-103
I103FLTPROT
Functionality
I103FLTPROT is used for fault indications in monitor direction. Each input on the
function block is specific for a certain fault type and therefore must be connected to
a correspondent signal present in the configuration. For example: 68_TRGEN
represents the General Trip of the device, and therefore must be connected to the
general trip signal SMPPTRC_TRIP or equivalent.
The delay observed in the protocol is the time difference in between the signal that
is triggering the Disturbance Recorder and the respective configured signal to the
IEC 60870-5-103 I103FLTPROT.
Step
Default
1
160
Section 13
Monitoring
Description
Function type (1-255)
447