Function Block; Signals - ABB REG650 Technical Manual

Section 13
Monitoring
13.14.3
13.14.4
426

Function block

SSIML
BLOCK LEVEL
BLK_ALM LVL_ALM
LEVEL LVL_LO
TEMP TEMP
LVL_ALM TEMP_ALM
LEVEL_LO TEMP_LO
SET_L_LO
SET_T_LO
RESET_LO
IEC09000128-1-en.vsd
IEC09000128 V1 EN
Figure 205: SSIML function block

Signals

Inputs LEVEL and TEMP together with settings LevelAlmLimit,
LevelLOLimit, TempAlarmLimit and TempLOLimit are not
supported in first release of 650 series.
Table 340: SSIML Input signals
Name Type
BLOCK BOOLEAN
BLK_ALM BOOLEAN
LEVEL REAL
TEMP REAL
LVL_ALM BOOLEAN
LEVEL_LO BOOLEAN
SET_L_LO BOOLEAN
SET_T_LO BOOLEAN
RESET_LO BOOLEAN
Table 341: SSIML Output signals
Name Type
LEVEL REAL
LVL_ALM BOOLEAN
LVL_LO BOOLEAN
TEMP REAL
TEMP_ALM BOOLEAN
TEMP_LO BOOLEAN
Default Description
0 Block of function
0 Block all the alarms
0.0 Level input from CB
0.0 Temperature of the insulation medium from CB
0 Level alarm signal
0 Level lockout signal
0 Set level lockout
0 Set temperature lockout
0 Reset level and temperature lockout
Description
Level service value
Level below alarm level
Level below lockout level
Temperature of the insulation medium
Temperature above alarm level
Temperature above lockout level
1MRK 502 034-UEN -
Technical Manual