Parameter Setting Groups Actvgrp; Identification; Function Block; Signals - ABB REG650 Technical Manual

Section 16
Basic IED functions
16.4.3
16.4.3.1
16.4.3.2
16.4.3.3
16.4.3.4
496

Parameter setting groups ACTVGRP

Identification

Function description
Parameter setting groups

Function block

ACTVGRP
ACTGRP1 GRP1
ACTGRP2 GRP2
ACTGRP3 GRP3
ACTGRP4 GRP4
SETCHGD
IEC09000064_en_1.vsd
IEC09000064 V1 EN

Signals

Table 413: ACTVGRP Input signals
Name Type
ACTGRP1 BOOLEAN
ACTGRP2 BOOLEAN
ACTGRP3 BOOLEAN
ACTGRP4 BOOLEAN
Table 414: ACTVGRP Output signals
Name Type
GRP1 BOOLEAN
GRP2 BOOLEAN
GRP3 BOOLEAN
GRP4 BOOLEAN
SETCHGD BOOLEAN

Settings

The function does not have any settings available in Local HMI or Protection and
Control IED Manager (PCM600).
IEC 61850 IEC 60617
identification identification
ACTVGRP -
Default Description
0 Selects setting group 1 as active
0 Selects setting group 2 as active
0 Selects setting group 3 as active
0 Selects setting group 4 as active
Description
Setting group 1 is active
Setting group 2 is active
Setting group 3 is active
Setting group 4 is active
Pulse when setting changed
1MRK 502 034-UEN -
ANSI/IEEE C37.2
device number
-
Technical Manual