Loop Delay Function Block Loopdelay; Timer Function Block Timerset - ABB REG650 Technical Manual

1MRK 502 034-UEN -
12.3.1.7
12.3.1.8
Technical Manual
Settings
The function does not have any parameters available in Local HMI or Protection
and Control IED Manager (PCM600).

Loop delay function block LOOPDELAY

Function description
Logic loop delay function block
The Logic loop delay function block (LOOPDELAY) function is used to delay the
output signal one execution cycle.
Function block
LOOPDELAY
INPUT
IEC09000296-1-en.vsd
IEC09000296 V1 EN
Figure 170: LOOPDELAY function block
Signals
Table 244: LOOPDELAY Input signals
Name Type
INPUT BOOLEAN
Table 245: LOOPDELAY Output signals
Name Type
OUT BOOLEAN
Settings
The function does not have any parameters available in Local HMI or Protection
and Control IED Manager (PCM600).

Timer function block TIMERSET

Identification
Function description
Timer function block
IEC 61850
identification
LOOPDELAY
OUT
Default Description
0 Input signal
Description
Output signal, signal is delayed one execution
cycle
IEC 61850
identification
TIMERSET
Section 12
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
Logic
329