Charging A Battery Installed In Omnii - Psion Teklogix Omnii XT10 User Manual

Chapter 6: Peripheral Devices & Accessories

Charging a Battery Installed in Omnii

Figure 6.9 Back of ST4003 Desktop Docking Station
6.7.1

Charging a Battery Installed in Omnii

• Insert the DC power cable to the DC IN port on the desktop docking station. Plug the
pronged end of the cable into an AC outlet.
• Slide the hand-held into the docking station, making certain that the hand-held is
securely seated on the docking station connector pins and engages the locking arms of
the docking station. When the Omnii is switched on, a message is displayed briefly on
the screen indicating that the unit is properly installed in the station and the docking
station icon is displayed in the taskbar.
The LED on Omnii lights up indicating that the unit has external power and battery charging
will begin. It is safe to leave the unit in the desktop docking station while it is not in
use—the battery will not be overcharged.
182 Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Spare Battery
Charge Well
Host USB Port
Locking Arm
Connector Pins
DC IN Port
RJ45 Ethernet Port
Client USB Port
DE9M Serial Port