Connecting The Wireless Network - Psion Teklogix Omnii XT10 User Manual

Chapter 2: Basic Operation
Wi-Fi Config: Configure Tab

2.8.2.6 Connecting the Wireless Network

Your configured network is listed in the Configure tab. An [X] next to a network indicates
that this is the network to which Omnii will connect.
• Tap on the Connect button to activate your network.
The Status tab is displayed. The Status field displays ASSOCIATING while the 802.11b/g
radio attempts to connect to the network. Once the association is complete, the Status tab is
populated with the appropriate information about your network.
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual 25