Upc E Settings; Upc/Ean Shared Settings; C.3.8 Upc E Settings - Psion Teklogix Omnii XT10 User Manual

Transmit Number System
If this parameter is enabled, the number system digit is transmitted with the decoded bar
code data.
Convert To EAN 13
If this parameter is enabled, a UPC A bar code is converted to EAN 13.
Add/Remove Data
Refer to "Add/Remove Data" on page C-14 for details.
C.3.8

UPC E Settings

Enabled
Set this parameter to on to enable "UPC E".
Enable UPC-E1
Set this parameter to on to allow "UPC-E1" (zero suppressed) bar code scans.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Transmit Number System
If this parameter is enabled, the number system digit is transmitted with the decoded bar
code data.
Convert To UPC-A
This parameter converts UPC E (zero suppressed) decoded data to UPC A format before
transmission. After conversion, data follows UPC A format and is affected by UPC A pro-
gramming selections (e.g. Check Digit).
Add/Remove Data
Refer to "Add/Remove Data" on page C-14 for details.
C.3.9

UPC/EAN Shared Settings

The setting assigned to the "Addendum" parameter associated with this option is shared
across all UPC and EAN bar codes.
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)

UPC E Settings

C-31