Stylus Properties - Psion Teklogix Omnii XT10 User Manual

Chapter 5: Configuration

Stylus Properties

Tapping on the Export button will display a "Save As" Export Settings dialog, with the
default name PsionVU_Settings.xml, which the Administrator can change even after it has
been saved.
The .xml file contains all of the PsionVU configured settings, including the Administrator
Password. When the file is imported to a device, the new password is applied immediately.
• Whether choosing to import or export files, the same file location options under My
Device will be listed. Following the action, a message stating the success of the opera-
tion and the location of the file will be displayed.
• With the exception of the password, changes made to settings will take effect only after
a warm reset. If further changes to the configuration are made, they will overwrite the
changes caused by the import operation. After importing a file, a dialog will appear to
enable you to reset now or later.

5.5.10 Stylus Properties

Note: Touchscreen calibration may not be enabled on your unit. If your screen appears to
require recalibration, contact your supervisor.
• In the Control Panel, choose the Stylus icon.
120 Psion Teklogix Omnii XT10 Hand-Held Computer User Manual