C.3.4 Code 128 - Psion Teklogix Omnii XT10 User Manual

Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
Code 128
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to
the number of characters (i.e., human readable characters), including check digit(s).
Length Restriction
Refer to "Length Restriction" on page C-14 for details.
Add/Remove Data
Refer to "Add/Remove Data" on page C-14 for details.
C.3.4 Code 128
Enabled
Setting this parameter to on enables "Code 128".
GS1-128
"GS1-128" is the GS1 implementation of the Code 128 barcode specification. The former
correct name was UCC/EAN-128.
GS1-128 Identifier
"GS1-128 Identifier" allows the AIM ID " ]C1" for EAN 128 to be transmitted or removed.
By default, this identifier is transmitted if EAN 128 is enabled.
GTIN Compliant
GTIN (global trade item number) processing transmits EAN 128 as the 14-character
EAN/UCC GTIN. To use GTIN processing, you must activate the EAN 128 symbology.
Important: When EAN 128 and GTIN processing are both activated, it is not possible
FNC1 Conversion
"FNC1 Conversion" allows the FNC1 character to be converted to another character for ap-
plications that cannot use the default <GS> Group Separator or hex (1d).
Double-tapping on this option displays a dialog box listing the allowable range: 0 to 255.
C-28 Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
to read normal EAN 128 Codes.