Code 128; C.4.3 Code 39 - Psion Teklogix Omnii XT10 User Manual

Appendix C: Bar Code Settings
Imager
Code 39
C.4.3 Code 39
Enabled
Set this parameter to on to enable "Code 39".
Full ASCII
If this parameter is enabled, the characters +, %, and / are used as escape characters. The
combination of an escape character and the next character is converted to an equivalent
ASCII character.
Check Digit Verification
When this parameter is enabled, the integrity of a "Code 39" symbol is checked to ensure
that it complies with specified algorithms.
Note: Only those "Code 39" symbols that include a MOD 43 check digit are decoded
when this parameter is enabled.
Include Check
If this parameter is enabled, the check digit is included with the decoded bar code data.
Length Restriction
Refer to "Length Restriction" on page C-14 for details.
Add/Remove Data
Refer to "Add/Remove Data" on page C-14 for details.
C.4.4

Code 128

Enabled
Set this parameter to on to enable "Code 128.
Length Restriction
Refer to "Length Restriction" on page C-14 for details.
Add/Remove Data
Refer to "Add/Remove Data" on page C-14 for details.
C-46 Psion Teklogix Omnii XT10 Hand-Held Computer User Manual