Page 4
Type, model, and serial number should also be provided. Before returning any prod- ucts to Psion Teklogix, please call the Customer Services Group for a Return Autho- rization number.
Page 8
6.2.3 Name Servers Tab ......118 6.2.4 Advanced Features ......118 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 9
8.4.6 Desktop Docking Station Ports ....146 8.4.7 Linking A WORKABOUT PRO To A PC ... 146 8.4.7.1 Using Microsoft® ActiveSync® To Work With Files . 147 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 10
8.10.6 Powered Vehicle Cradle Installation ....160 8.10.6.1 Wiring Vehicle Power To The Cradle ..160 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 11
C.1.3 Installation: WORKABOUT PRO As A Device On Your PC . C-4 C.1.4 Post Installation ......C-5 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
ANT. PSION TEKLOGIX INC. HAS INDEPENDENTLY DETER- MINED HOW TO USE THE SOFTWARE IN THE DEVICE, AND MS HAS RELIED UPON PSION TEKLOGIX INC. TO CONDUCT SUFFI- CIENT TESTING TO DETERMINE THAT THE SOFTWARE IS SUIT- ABLE FOR SUCH USE.
Page 14
SOFTWARE, including the U.S. Export Administration Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments. For addi- tional information see http://www.microsoft.com/exporting/. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 15
Software is distrib- uted within an exact copy of the original MDC self-extracting installation file. In other words, nothing may be left out of the Shareware as distributed on MDC's web site at http://www.mtghouse.com. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 16
Software. You acknowledge such ownership and intellectual property rights and will not take any action to jeopardize, limit or inter- fere in any manner with MDC's or its suppliers' ownership of or rights with respect Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 17
Your exclusive remedy under this para- graph shall be, at MDC's option, a refund of the purchase price of the product con- taining the Software or replacement of the Software which is returned to MDC or a Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 18
SOFTWARE PROVE DEFECTIVE, YOU (AND NOT LICENSOR OR AN LICENSOR AUTHORIZED REPRESENTATIVE) ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WAR- Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 19
Your use of any software produced by MDC is based only on your acknowledge- ment that you have read this License, understand it, and agree to be bound by its terms and conditions. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 20
ARE IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICA- BLE TO THE LICENSE OF THE SOFTWARE TO YOU. Meetinghouse Data Communications, Inc. 150 Greenleaf Avenue, Unit F Portsmouth, NH 03801 Revised 8/12/2002 VIII Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Manufacturer: Legal Representative in Europe: Signature Signature John Chiou Dominique Binckly Position Position Product Certification Manager Vice President International Sales Place Place ASKEY COMPUTER, TAIPEI PSION TEKLOGIX S.A. France Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Kyle Day Piyang Chiang Full Name Full Name General Manager V.P. Channel Sales Position Position Askey International Corp Erlanger, KY 41018, USA Place Place Feb. 4, 2004 Feb. 4, 2004 Date Date Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 23
2. This device must accept any interference received, including interfer- ence that may cause undesired operation. Changes or modifications not expressly approved by Psion Teklogix, the party responsible for compliance, may void the user's authority to operate the equipment. 1. FCC Information to Users...
Page 24
1040.10, 1040.11 and DIN EN 60825-1: 2001, and is classified as a Class 2 laser product. PERATE XPLOSIVE TMOSPHERE Operating Psion Teklogix equipment where explosive gas is present may result in an explosion. EMOVE OVERS NCLOSURES To avoid injury, the equipment covers and enclosures should only be removed by qualified service personnel.
Page 25
140. Carefully review all battery safety issues. ORSICHT Explosiongefahr bei unsachgemäßem Austausch der Batterie Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleichwertigen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers. XIII Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 27
1.3.2 The WORKABOUT PRO Hand-Held Computer ... . 9 1.3.3 Regulatory Labels ......10 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
This appendix also lists the world- wide office addresses and phone numbers. Appendix B: Port Pinouts includes port pinouts. Appendix C: USB Setup Application details how to use the USB Setup application. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
1.2m (4 ft.) drop to concrete. • WORKABOUT PRO Model Variants WORKABOUT PRO M: Monochrome touchscreen display 32 MB Flash 64 MB RAM WORKABOUT PRO C: 32 MB Flash 128 MB RAM Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 31
Note: WAN, 802.11b and Bluetooth are available simultaneously on WORKABOUT PRO C units. • Application Software: Internet Explorer 6.0 for CE Open TekTerm (optional) ANSI, TESS terminal emulations IBM 3270, IBM 5250, HP 2392 (optional) Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 32
Optional 2D Imager expansion module* Optional 1D SE 1223HP laser scanner expansion module* Optional field-upgradeable/replaceable pistol grip* Note: All are field upgradeable • Expansion Slots: One SD/MMC memory card slot – user accessible Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 33
Storage temperature: -13˚ F to 140˚ F (-25˚ C to 60˚ C) Humidity: 5-95% RH non-condensing Rain/Dust: IEC 529, classification IP54 Shock: Multiple 4 ft. (1.2m) drops to polished concrete • Power Accessories AC Wall adaptor (charge and operate hand-held) Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 34
Port Replicator for vehicle cradles (field installable option) includes 3 RS232 ports plus USB device port. • Carrying Accessories: handstrap, pistol grip w/ trigger, shoulder strap. holster, belt loop, protective vinyl carrying case with belt clip. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
The WORKABOUT PRO Hand-Held Computer 1.3.2 The WORKABOUT PRO Hand-Held Computer Figure 1.1 WORKABOUT PRO Audio Jack Low Insertion Tether Port Force Port (LIF) Figure 1.2 Tether Port, Low Insertion Force (LIF) Port And Audio Jack Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Using controls or adjustments or performing procedures other than those specified herein may result in hazardous radiation exposure. Figure 1.3 Scanner Module–Laser Warning Label Figure 1.4 End- Cap–Expansion Module Warning Figure 1.5 Back Plate–Expansion Module Warning Label Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 37
Chapter 1: Introduction Regulatory Labels Figure 1.6 Manufacturer Label – WORKABOUT PRO C Unit Figure 1.7 Manufacturer Label – WORKABOUT PRO M Unit Figure 1.8 FCC Compliance Label Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 38
Chapter 1: Introduction Regulatory Labels Figure 1.9 Standard Capacity Battery Label Figure 1.10 High-Capacity Battery Label Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 39
2.4 Calibrating The Touchscreen ......17 2.5 Resetting The WORKABOUT PRO Hand-Held ....17 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
• Slide the charged battery into the unit. Replace the battery cover, and turn the fasteners at the base of the battery cover clockwise to lock the battery in place. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
• When the LED flashes green, release the <ENTER/ON> button. A splash screen displaying the Psion Teklogix logo and the Microsoft® Windows CE .NET logo appears followed by the startup desktop. Note: If the unit was already in use – the unit may be off (suspend state) – press- ing <ENTER/ON>...
“Calibrating The Touchscreen” on page 30 for details. 2.5 Resetting The WORKABOUT PRO Hand-Held Important: Because Psion Teklogix cannot guarantee what has been saved (registry) after a reset, this should be considered as a last resort. To reset the unit: •...
Page 45
3.11.1 Caring For The Touchscreen ....39 3.11.2 Cleaning The WORKABOUT PRO....39 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Chapter 3: Getting To Know The WORKABOUT PRO Features Of The WORKABOUT PRO 3.1 Features Of The WORKABOUT PRO Sound Port Stylus (pointing tool) (Light Emitting Diode) Microphone Figure 3.1 Front Of WORKABOUT PRO M Or C Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
High Capacity Lithium Ion battery pack or three AA alkaline batteries. If you are using a Lithium Ion battery pack, preparing the hand-held unit for operation requires that the battery pack be charged before it is installed in the unit. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Note: If you are using a docking station or other external power source, you can insert an uncharged battery, dock the unit and switch it on. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Important: To avoid damaging the battery, chargers will not begin the charge process until the battery temperature is between 0˚ C to 45 ˚C (32˚ F to 113˚ F). Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
• When the LED flashes green, release the <ENTER/ON> button. A splash screen displaying the Psion Teklogix logo and the Windows CE .NET logo appears followed by the startup desktop. Note: If the WORKABOUT PRO is in suspend state, pressing <ENTER/ON>...
These functions are colour coded in orange and blue print above the keyboard keys. Note: Almost all keys can be reprogrammed to suit your requirements. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Pressing this key twice locks it ‘on’ so that when you press an alpha key, an upper case character is displayed. When you press a numeric key, the associated symbol on the numeric key is displayed Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 54
Function keys <F1> to <F10> perform special, custom-defined functions. These keys are accessed by pressing <BLUE> followed by numeric keys <1> to <10>. They can be used with the Windows CE .NET operating system or another application. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
To set the range of the backlight intensity and the duration of time that the backlight will remain on, you’ll need to choose the Display icon in the Control Panel. Refer to “Display Backlight” on page 65 for details about the Display Properties Backlight tab. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Stylus Properties dialogue box in the Control Panel to recalibrate the screen. • In the Control Panel, choose the Stylus icon to display the Stylus Properties window. Figure 3.5 Stylus Icon Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
3.6.1 The LED The WORKABOUT PRO is equipped with a single, dual-coloured LED. When the <ENTER/ON> key is pressed, the LED flashes green to indicate that the unit has been powered up. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
LED on your unit. Refer to your application manual for details. 3.6.2 Onscreen Indicators The taskbar at the bottom of the screen displays a variety of system status indicators. Figure 3.7 Taskbar Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 59
When the battery power is completely depleted, a final warning window indicates that the WORKABOUT PRO will be powered down. If the unit is being powered externally, an external power icon is displayed in the taskbar. Full Empty External Power Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
The volume keys are located above the <A> and <B> keys. The increase volume key is labelled with a plus symbol and the decrease volume key is labelled with a minus symbol Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
(the capacity of a new battery). An aged battery, even when fully charged, shows somewhat less capacity than nominal. Double-tapping on the battery icon displays a dialogue box that provides detailed information about the battery status and performance. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
PRO to link to an Ethernet network. They are typically used to upload transaction data to a server computer when a radio link in not available. Note: Refer to “Chargers And Docking Stations” on page 141 for more details. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
To add additional non-volatile memory to your hand-held, you can insert a Secure Digital/Multi-Media Card (SD/MMC) through the battery compartment. 3.10.1 Inserting The Card • Remove the battery cover and the battery. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 64
• Swing hinged door back into place. To remove the card: • Gently press it inward slightly until the detent unlatches, and the card is expelled from the slot. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
The plastic is partially soluble in oils, mineral spirits and gasoline. The plastic slowly decomposes in strong alkaline solutions. • To clean ink marks from the keypad and touchscreen, use isopropyl alcohol. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 67
4.5 Using A Dialogue Box ......55 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Keep in mind that unlike a desktop computer, the WORKABOUT PRO does not support key chording (pressing two keys at the same time). You must press one key followed by the next in sequence. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
4.3 The Startup Desktop When the WORKABOUT PRO boots up, the startup desktop (shell) is displayed. Any applications stored in the Startup folder start up immediately. Figure 4.2 The WORKABOUT PRO Startup Desktop Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
WORKABOUT PRO. Remote Desktop Connection This option allows your WORKABOUT PRO to communicate with a remote desktop PC. “Remote Desktop Connection” on page 59 provides a website address with step-by-step instructions. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
4.3.2.2 Customizing The Taskbar To customize the taskbar so that it displays only those icons you require: Taskbar... • Tap on the Settings option, and then tap on in the sub-menu, Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
• Tap on the Windows® Start button in the left-most corner of the taskbar. Figure 4.5 Start Menu • Tap on the item in the menu with which you want to work. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Choose the button. Password Properties A dialogue box labelled is displayed. Password: • Type the new password in the text box Confirm Password: • In the text box, retype the new password. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
System Tray To display the dialogue box attached to an icon: • Press the <LEFT> or <RIGHT> arrow keys to choose a taskbar icon and press <ENTER> to display the associated dialogue box. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Tap on in the Cycle Tasks 4.4.6 Power Info Start Menu Power Properties Selecting from the displays the dialogue box. Power Info This dialogue box indicates the remaining charge capacity of the battery. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Control Panel icon. Microsoft Wordpad is application, an abbreviated version of Microsoft Word, allows you to create documents using the WORKABOUT PRO. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Control Panel Control Panel contains applets used to configure hardware, the operating system and the shell. If your unit is running with the Psion Teklogix Open Tekterm application or another application, additional configuration applets may appear in Control Panel. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Choosing the Run option from the displays a dialogue box in which you can enter the name of the program, folder or document you want to open or launch. Figure 4.11 Run Dialogue Box Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
(registry) settings intact. Any unsaved data is lost. Cold Reset Cold Reset option resets the WORKABOUT PRO. Any files not stored in permanent memory are lost. However, the registry settings are saved. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Checkbox: This box allows you to select or deselect an option. To select or deselect a checkbox, tap the stylus in the checkbox to select (√) or deselect it. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 82
Saving Your Choices: Once you’ve made all your changes, tap on the OK button or press the <ENTER> to save your changes and exit the dialogue box. Note: A dialogue box item that is displayed in grey text indicates that it is not currently available. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 83
5.6.4 The Bluetooth GPRS Phone ..... 84 5.7 SNMP (Simple Network Management Protocol) Setup ..90 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 84
5.9.3 PIN Settings ......105 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Startup folder start up immediately. Control Panel To access the Start Start Menu • Use the stylus to tap on the button in the taskbar to display the Control Panel Tap on Settings> Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Changes the appearance (window colour scheme) on the unit desktop. Keyboard Toggles character repeat on and off and specifies delay and rate for repeated characters. It also allows you to adjust the keyboard backlight. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 87
75 for details.) Regional Settings Allows you to specify the local language the display text will use along with the format of numbers, currency, time and date for your region. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 88
PC Connection Change Con- Enables direct connections to a desktop computer. Selecting the ‘ nection ’ button allows you to change the type of direct connect to your PC. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 89
Total Recall Total Recall is a Psion Teklogix utility developed to maintain the persis- tence of installed applications and settings over cold boots. This is based on a backup and restore concept and is extended to incorporate many advanced features.
Keep in mind that contrast adjustments only an affect monochrome displays. • In the Display Properties dialogue box, open the Contrast tab. Figure 5.3 Display Contrast Properties Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Bright For The value chosen from this dropdown menu determines the duration of time that the backlight stays on at the configured intensity when a unit is not in use. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
5.5.1.3 Display Appearance • In the Display Properties dialogue box, open the Appearance tab. Figure 5.5 Display Appearance Properties This dialogue box allows you to customize the display colour scheme. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
• In the , choose the icon. Figure 5.6 Choosing The Keyboard Icon 5.5.2.1 Key Repeat • In the Keyboard Properties dialogue box, open the Repeat tab. Figure 5.7 Key Repeat Properties Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
ON Time The value chosen from this dropdown menu determines the duration of time that the keyboard backlight stays on when a unit is not in use. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
– these keys are displayed in lowercase characters in the taskbar, you’ll know that the orange key blue key and the are not locked. They will become inactive following a key press. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
In the Macro: menu, highlight a macro key number – for example, macro 1 to Record Macro assign a macro to macro key <M1>. Tap on the button. A message screen is displayed instructing you to ‘Please Enter Key Strokes’. Figure 5.11 Recording A Macro Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Delete Macro • Tap on the button, and press <ENTER>. 5.5.2.5 Unicode Mapping • In the Keyboard Properties dialogue box, open the Unicode Mapping tab. Figure 5.12 Unicode Mapping Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 98
Position the cursor in the ‘Unicode Mapping’ field and type a Unicode value for the highlighted key. Note: To add a shifted state – <SHIFT> and/or <CTRL>, tap the stylus on the checkbox next to ‘SHIFT Pressed’ and/or ‘CTRL Pressed’. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Slide the volume button to the left to lower the beeper volume or to the right to increase the beeper volume. ‘Enable sounds for:’ • Under the heading , enable (√) the conditions under which you want the WORKABOUT PRO to emit a beep. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Figure 5.16 Choosing The Power Icon 5.5.4.1 Battery Capacity • In the Power Properties dialogue box, open the Battery tab. Figure 5.17 Power Battery Properties Battery tab details information about the battery installed in your WORKABOUT PRO. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Battery Power Switch State To Suspend Important: If a WORKABOUT PRO is using battery power, Psion Teklogix recommends setting the Suspend value to 10 minutes. Setting ‘Switch State To Suspend’ to values greater than 10 or setting the suspend state to ‘Never’ will adversely affect the battery run time.
Figure 5.19 Stylus Icon 5.5.5.1 Setting Double-Tap Sensitivity Double-Tap • In the tab, follow the directions to tailor the sensitivity of the stylus when you tap on the touchscreen. Figure 5.20 Setting Stylus Sensitivity Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
This tab allows you to disable the touchscreen. Options ‘Disable the touch panel’ • Choose the tab and then tap on the checkbox. 5.5.6 Certificate Assignment • In the Control Panel, choose the Certificate icon. Figure 5.22 Certificate Icon Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Bluetooth-equipped devices come within a 5 meter range of each other, they can establish a connection. Because Bluetooth utilizes a radio-based link, it does not require a line-of-sight connection in order to communicate. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Bluetooth devices with which you can communicate. Figure 5.25 Bluetooth Devices Tab 5.6.1 The Devices Tab Scan Scan • Click on the < > button to list available devices. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 106
Once the service is successfully activated, the assigned port (if applicable) will appear in the Port column of the Services list box. You can choose to use BSP or COM as the port name. BSP is the latest Microsoft Bluetooth stack standard, but Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 107
If the WORKABOUT PRO attempts to connect to a remote device that has Authentication enabled and does not have a required PIN set, an Authentication Request dialogue box appears. • Enter the PIN, and click on <OK> to connect the devices. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Once you activate a server profile, it is recommended that the WORKABOUT PRO be rebooted before you try to bond from a server. Note: You do not need to reboot if you are deactivating a server. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
System Properties on the icon in , which will open the dia- Device Name logue box. Click on the tab to access the menu and change your settings. Then click on OK. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
1. To set up the internet parameters, select the Control Panel. icon from the Figure 5.28 Network And Dial-up Connection Icon Make New Connection 2. Select the icon. Figure 5.29 Creating A GPRS Connection Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 111
5. In the dropdown menu labelled , choose the name of the Configure modem with which you want to connect, and then choose the Device Properties button to display the dialogue box. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 112
The unit then disconnects. Figure 5.32 Port Settings Call Options Cancel the call if not connected within 6. Under the tab, turn off and press <ENTER> to save your changes. Figure 5.33 Call Options Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 113
The phone number you enter is network carrier dependent. Once you’ve Finish specified all the necessary information, choose the button. Control Panel Dialing 8. In the , choose the icon. Figure 5.35 Dialing Icon Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 114
Network and Dial-up Connections icon. 11. In the network connection window, the new network configuration – in GPRS Network this case – – is displayed. Choose the new icon. Figure 5.37 GPRS Network Connection Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 115
Figure 5.38 Successful Connection Hide • Select the button to move this message to the background. You can now access the internet. Figure 5.39 Accessing The Internet Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
MIB-II, a management information base that defines the common features of TCP/IP networks. The SNMP Agent software embedded in the WORKABOUT PRO supports SNMPv1 (RFC 1157). Control Panel SNMP • In the , choose the icon. Figure 5.40 SNMP Icon Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
MIB-II’s object. sysContact Location This parameter is used to identify the physical location of this node (e.g., Warehouse A: Pillar 32B). The content of this parameter is accessible through MIB-II’s object. sysLocation Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
’ allows the device to respond to SNMP queries and to send Traps. After enabling this option and rebooting the device, the SNMP Agent will automatically start up. To disable this feature, remove the check mark from the check box. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
The value assigned here is the name assigned by the network administrator to the set of devices to which this managed node belongs. Rights This menu allows you to specify access – that is, ‘Read-Only’ or Read-Write’ Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Remove choose the button. Delete Confirmation screen is displayed. • To remove a community, tap the button. • If you decide not to remove the community, tap the button. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
5.7.3.2 Adding A Destination To add a new destination: • Tap on the button. Figure 5.46 Adding A Trap Destination • Type a destination in the text box provided, and press <ENTER>. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
• Tap on the button. Delete Confirmation screen is displayed. • To remove a destination, tap on the button. • If you decide not to remove the destination, tap on the button. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Adding A Host To add a new host: • Tap on the button. Figure 5.49 Adding A Host • Type a new host IP address in the text box provided, and press <ENTER>. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Make the necessary changes, and press <ENTER>. 5.8 Total Recall Total Recall is a Psion Teklogix utility developed to maintain applications and setting over cold boots. This utility is based on a backup and restore concept and is extended to incorporate power advanced features.
Figure 5.52 Profile Details Profile Information This dialogue box lists the possible storage destinations for the profile file. Profile Name • To begin, type a name for the profile in the field labelled Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 126
The location for the profile will typically be Flash or a Storage card. Next Add Files. • Tap on the < > button to display the next dialogue box – Add Files Figure 5.54 Adding Files Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 127
Performing The Backup Figure 5.56 Performing The Backup Backup To \Flash \Storage Card • Tap on Select the < > or < > button to start the process and create a profile. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Settings Network... GPRS tion window, double-tap on the icon that has been set up for you. Dial-Up Connect 3. In the dialogue box, tap on the < > button. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
5.9.2 Manual GSM Setup – APN Settings Manager Note: Before using the APN Manager, close any active connections. Control Panel APN Manager Settings • In the , choose the icon. Figure 5.58 APN Manager Settings Icon Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 130
Figure 5.59 APN Settings Tab • Tap on the < > button. Figure 5.60 Adding A New APN Add/Edit APN • In the dialogue box, type a new APN, and tap on < >. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Enable APN for auto configuration to ‘ ’. 5.9.3 PIN Settings Pin Settings tab is used to change, enable or disable the PIN (Personal Identification Number) assigned to your SIM card. Figure 5.62 PIN Settings Tab Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 132
Keep in mind that if the WORKABOUT PRO is starting from a ‘cold reboot’, the PIN is deleted. If unauthorized use of the Save PIN for auto configuration hand-held is a serious issue at your site, should be disabled. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 133
6.2.3 Name Servers Tab ......118 6.2.4 Advanced Features ......118 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Remove the end-cap at the top of the WORKABOUT PRO – unscrew the four Philips head screws from the cap. SW1401 Power Switch End-Cap Figure 6.1 The End-Cap And The SW1401 Power Switch Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 136
CF slot at the top of the unit until it clicks into place. Figure 6.2 Inserting A CF Card Once the radio is installed, you’ll need to attach a CF card stopper to hold the radio in place. Figure 6.3 CF Stopper Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
While most common 802.11b settings are configured as defaults, there are some fields that must be completed, including the SSID of your access point and the security methods implemented in the network (including access keys). Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 138
Note: You can also press <CTRL> <ESC> to display the Start Menu. 802.11b Wireless LAN Settings 2. Tap on the radio icon to open the window – in NETWLAN1 the sample screen this is labelled Figure 6.6 802.11b Wireless LAN Settings Window Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 139
The options under this tab list existing networks to which you can connect, and it allows you to add a new network or modify the settings for an existing network. Figure 6.8 Wireless Information Tab Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 140
field can contain a maximum of 32 characters. The name assigned here is listed as a preferred network. Important: Keep in mind that the WORKABOUT PRO will only communicate with access points that are configured with the same SSID. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 141
This text box is used to specify a 5 or 13 ASCII character sequence or an equivalent 10 or 26 Hexadecimal digit sequence that matches the active WEP key on the access point. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 142
77 provides a website that outlines how to create certificates for your network. 6. Saving and exiting the radio setup. OK> Once you have completed your configuration, tap on < Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
<Configure...> • Tap on the button to define a static IP address. Figure 6.12 Defining An IP Address Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
WINS and DNS resolvers. The format for these fields is ###.###.###.###. 6.2.4 Advanced Features Advanced Wireless Settings To display the dialogue box: <Advanced...> Wireless Information • Tap on the button in the tab. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Highlight the network that you want to modify. Properties> • Tap on the < button. Wireless Properties • Make any necessary changes in the dialogue box, and press <ENTER> to save the changes. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 147
7.1.5 Installing A GSM/GPRS Module ....127 7.1.6 Installing An SE 1223HP Scanner ....128 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
WORKABOUT PRO. This is a simple process of unfastening four screws on the end-cap and six screws on the back plate. Back plate End-cap SW1401 Power Switch Figure 7.1 Removing The End-Cap And Back Plate Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
To insert a PCMCIA PC card in your WORKABOUT, you will need to install a PCMCIA module equipped with a 100-pin connector. This module snaps onto the expansion connector on your WORKABOUT PRO. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 152
Once the PCMCIA module is installed in the unit, you do not need to remove the back plate to insert a PCMCIA PC card. Just remove the end-cap and slide the card into the unit. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
The GSM/GPRS module accommodates a GSM radio and a SIM card and is equipped with a built-in antenna. The module snaps onto the expansion connector on your WORKABOUT PRO. Antenna Antenna Contacts SIM Card Slot Antenna GSM/GPRS Radio Contacts Figure 7.6 GSM/GPRS Module Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
7.1.6 Installing An SE 1223HP Scanner The SE 1223HP scanner is the internal scanner module available with the WORKABOUT PRO. To install it: • Remove the batteries. If your unit is using AC power, disconnect it. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 155
Figure 7.8 Attaching The Flex Cable To The Scanner Module • Fit the scanner module over the back of the WORKABOUT PRO – it replaces the back plate of the unit. • Fasten the module in place with the screws provided. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 156
Installing An SE 1223HP Scanner • Slide the SW1401 power switch to the right to turn power back on, and replace the end-cap, backplate and batteries. Figure 7.9 Scanner Module Installed In WORKABOUT PRO Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 157
8.6 Quad Battery Charger – Model #WA3004 ....150 8.6.1 Charging Batteries ......150 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 158
8.10.7 The Port Replicator ......161 8.11 Bluetooth Peripherals ......162 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
The hand strap can be attached to the back of the WORKABOUT PRO to provide a secure means for operators to carry the hand-held. The hand strap is attached to the back of unit using two Phillips head screws provided with this accessory. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 160
Stretch the hand strap toward the base of the WORKABOUT PRO, and hook the bottom of the strap into the slot near the base of the battery pack. Figure 8.2 Attaching The Hand Strap Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
ABOUT PRO. Four Phillips head screws are provided with this accessory. Figure 8.3 Pistol Grip Note: Prior to installation, make sure the trigger mechanism is securely snapped into the pistol grip body and that the trigger operates properly. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
A carrying case is available for WORKABOUT PROs to shield the unit from damage. It is equipped with a soft plastic window to protect the unit display and keyboard. Figure 8.4 Carrying Case Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Figure 8.5 Belt Loop And Belt Clip • Clip the two hooks on the belt strap to the bottom of the carrying case. • Slide your belt through the belt loop. Figure 8.6 Attaching The Belt Loop Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 164
Using The Swivel Belt Loop With The Carrying Case Alternatively, you can attach a plastic clip to the swivel belt loop and clip it to your waistband or belt. Belt Clip Figure 8.7 Belt Clip Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Attach the pad on either the left or right side of the holster case, depending on whether you are left- or right-handed. • Fasten the belt comfortably around your waist. Slide the adjustable ring on the belt to tighten the holster in place. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
It is critical that this safety information be reviewed and that all warnings be strictly followed. Warning: BATTERIES ARE CONSIDERED HAZARDOUS WASTE and must be returned to Psion Teklogix for proper disposal. All used batteries must be forwarded to one of the following offices: Psion Teklogix Inc. Psion Teklogix Corp.
Important: Keep in mind when ordering a charger or docking station, you must also order the appropriate power cord separately. Psion Teklogix offers a variety of chargers and docking stations for the WORKABOUT PRO. These include: • Single Battery Charger – Model #WA3001 •...
The mains power cord shall comply with national safety regulations of the country where the equipment is to be sold. • Use of an attachment not recommended or sold by the battery charger manufacturer may result in fire, electric shock, or personal injury. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 169
The charger should be inspected by qualified service personnel. • Do not use the charger if any of the batteries or the charger get more than luke- warm. The equipment should be inspected by qualified personnel. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
The desktop docking station is designed to charge the battery installed in the WORKABOUT PRO along with a spare battery pack. Spare Battery Charge Well DC IN Socket Figure 8.10 Back Of Desktop Docking Station Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
8.4.4 Charger LED Indicators Figure 8.11 Battery Charge Status The desktop docking station is equipped with a single dual-coloured LED indicator in the lower-right corner of the front panel. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
The desktop docking station can be connected to a PC so that you can exchange files in the same way that you would between PC drives. A USB cable to PC is included with your docking station. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
8.4.8 Linking A WORKABOUT PRO To An Ethernet Network An USB-Ethernet adaptor cable (WA4010) is available to connect the WORKABOUT PRO to an Ethernet network through the desktop docking station. Ethernet Port Connector Figure 8.13 USB-Ethernet Adaptor Cable Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Figure 8.14 Single Battery Charger The single battery charger is designed to charge a single battery. It has a DC IN socket and is equipped with one LED that indicates the status of the charge process. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
151 for details. Flashing red then green Power up test sequence. in a 3 second cycle Table 8.3 Single Battery LED Behaviour Note: Battery charging continues whether the hand-held is switched on or off. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
When a battery is inserted in the charger, the colour and behaviour of the LED associated with the charge well in use indicates the status of the charge. Refer Table 8.3 on page 149 for details. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
If the power LED still does not light up: • Unplug the mains cable, and check the fuse at the rear of the charger. If the fuse appears to be intact, the charger requires service. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
The quad docking station permits each of four docked WORKABOUT PROs to communicate with a 10/100 BaseT Ethernet network at greater than 2Mbps. It also provides sufficient power to operate and fast charge the batteries in the units. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
The hand-helds are connected to an internal USB hub. The hand- held unit automatically detects insertion into a quad docking station and loads the appropriate drivers to communicate with the USB/Ethernet converters. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
WORKABOUT PRO. Wipe the contacts with a damp cloth if necessary. • Check the pogo pins inside the dock cradle for dirt. Gently wipe with a damp cloth if they appear to be dirty or discoloured. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
WORKABOUT PRO will supply AC power to your unit. The tether cable is equipped with a tether port so that you can attach a peripheral device to the hand-held while providing power. A power lead must be ordered separately. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
WORKABOUT PRO. • Insert the automotive adaptor DC power plug into the DC IN socket on the tether cable. • Insert the adaptor in your vehicle cigarette lighter outlet to power your unit. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Psion Teklogix for assistance (see Appendix A: Support Services And Worldwide Offices). Note also that for better protec- tion, the equipment should be mounted inside the vehicle roll cage. Pedestal mounts are recommended for all fixed mount locations because they offer optimal operator access.
For replacement parts and instructions contact Psion Teklogix. Partial disassembly is required. 8.10.5 Powered Cradle Installation In High Voltage Vehicles Warning: Voltages exceeding 60VDC are considered hazardous.
Keep in mind that the WORKABOUT PRO will continue to operate with or without vehicle power as long as its battery has sufficient charge. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
The functionality of the WORKABOUT PRO tether port is replicated into RS-232 serial interfaces by the port replicator. It provides the user with 3 DB9 serial interfaces as well as one Type B USB port (for connecting a Host device). Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Note: Bluetooth is not available for WORKABOUT PRO Ms The range of the Bluetooth radio is limited to approximately 5 meters. Psion Teklogix provides built-in support for the Bluetooth peripherals listed below. • GSM/GPRS universal handset •...
3.8V High-Capacity Li-ion rechargeable battery - up to 12 hours of operation. • Advanced Smart Battery w/ gas gauge. • Quick swap battery packs. • Built-in fast charger. • Rechargeable, user-replacable internal coin battery. • Also accepts 3 AA Alkaline batteries. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 192
Safety UL60950-1, CSA C22.2 No 60950-1 FCC Part 15 Class B EN 55022 EN 55024 Laser IEC 60825-1, Class 2 FDA 21 CFR 1040.10, 1040.11 Class II In Vehicle Cradle E Mark Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Mode, Bidirectional Redundancy, Symbology Programmable Parameters: types/lengths, Data Formatting, Serial Parameters, Beeper Tone 12 position ZIF connector. Symbol Standard SSI Interfaces: Interface with logic level serial data communications plus trigger, beeper and decode LED signals Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
2.6V min – DS2761 protection circuit initiates Recommended 1550 mA for 2.5hrs Fast Charge Max. Fast Charge Time 3.0 hrs. Recommended Termination 50 - 100 mA Taper Current Recommended Charge 30 min. Termination Timeout Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
1800 mAh nominal at 300mA discharge at –20 °C to 2.8V (minimum) Voltage 3.7V nominal (2.8V min. to 4.2V max.) Cell Configuration 1S3P (3 parallel connected cells) Cell Type Lithium-ion Polymer Battery Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 196
>60% nominal capacity after 20 days @ 60˚ C (full charge) -- High Temperature Recovery (140˚ F) >80% nominal capacity after 72 hours @ -20˚ C (full charge) -- Low Temperature Recovery (-4˚ F) Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
-10˚ C to 60˚ C (14˚ F to 140˚ F) * Nominal capacity indicates duration until the voltage drops down to 2.0V when discharged at a nominal discharge current at 20˚ C (68˚ F). Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
ERVICES ORLDWIDE FFICES Psion Teklogix provides a complete range of product support services to its custom- ers worldwide. These services include technical support and product repairs. A.1 Technical Support Technical Support for Mobile Computing Products is provided via e-mail through the Psion Teklogix customer and partner extranets.
Description Name Power Pin for Battery Pack Negative One-wire Interface Data Pin Power Pin for Battery Pack Positive Power Switch Sense Pin – – Plastic Rib Power Pin for Battery Pack Negative Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
TX Data } TX Data and RX Data are only available on terminals with no internal Bluetooth RX Data } Tether Detect, determines if a device is attached to the Tether port DC Power In, for supplying power to WORKABOUT PRO / charging battery (5V, 3A) Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
(5V, 3A) Not used. Not used. Not used. Not used. Not used. Ground Ground Ground B.5 Audio Mini-Plug Ring 2 Sleeve Terminal 1 Ring 1 Terminal 6 Terminal 3 Terminal 2 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
USB S ETUP PPLICATION C.1 USB Setup The USB Setup application (PN 1000997) is used to update a Windows PC so that it can connect to a Psion Teklogix WORKABOUT PRO. System Requirements • Windows® 2000 or XP • ActiveSync 3.1 or later...
ActiveSync. 2. Device Driver INF File Selection Dialogue Box: This dialogue box allows you to choose the paths of the appropriate inf files. Default file paths are provided in this dialogue box. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 207
files before attempting the installation. It specifies which files it will try to back up and the location to which it will back them up. Note: Both drivers are selected for backup by default. The backup directory is <system directory>\drivers\ptxBackup. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
<Continue> button is activated as soon as the connection is made. Where there was a devnode present in the system and it has been marked for rein- stall, the <Continue> button will not become active until Windows has Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
This dialogue box indicates the success or failure of the installation. • To view the log file, tap on the <Log File> button • To exit the program, tap on the <Exit> button. Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 211
34 moving the cursor 28 volume adjustment using the BLUE audio indicators key 35 description of beep conditions 34 belt loop, swivel (carrying case) 137 BKSP (DEL Key) 28 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 212
PCMCIA module, installing 125 scanner module, installing 128 Extensible Authentication Protocol (EAP) Contact 91 contrast, adjusting 30 control panel accessing 59 features (of WORKABOUT PRO) 4 basic setup 64 Function keys 28 Display Properties 64 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 213
115 arrow keys 28 network authentication (Shared Mode) BKSP 28 CTRL 28 Network Key, assigning 115 DEL 28 ESC 28 Function keys 28 Off & On buttons 15, 25 Macro keys 29 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 214
43 radio touch pen, using 43 adding new network connection 114 Windows CE, navigating 43 advanced settings of 118 security level icon 34 Bluetooth 78–84 Security Settings 48 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 215
Start Menu 47 cycle tasks 50 desktop 48 USB-Ethernet adaptor cable (WA4010) power info 50 programs 51 USB Setup Application C-1 Run 53 installing usbstor & wceusbsh inf C-4 Security 48 launching C-1 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...
Page 216
Windows Explorer 51 wireless connection setup 111 Wireless Information Tab 113 Wireless Properties tab 114 WORKABOUT PRO approvals 166 specifications 165 worldwide offices 4 802.1X authentication, enabling 116 802.11b radio, configuring 111 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual...