Upc A; Upc E - Psion Teklogix Omnii XT10 User Manual

Appendix C: Bar Code Settings
Non-Decoded Scanners

UPC A

Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the decoded
symbol.
Add/Remove Data
Refer to "Add/Remove Data" on page C-14 for details.
C.5.6

UPC A

Enabled
Set this parameter to on to enable "UPC A".
Include Number Sys
If this parameter is enabled, the number system digit is included with the decoded bar code
data.
Include Check
If this parameter is enabled, the check digit will be included with the decoded bar code data.
Addendum
Important: Before "Addendum" can take effect, the "Short Code" parameter (see
Refer to "Addendum" on page C-58.
Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the decoded
symbol.
Add/Remove Data
Refer to "Add/Remove Data" on page C-14 for details.
C.5.7

UPC E

Enabled
Set this parameter to on to enable "UPC E".
C-60 Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
page C-55) must be enabled.