Micro Pdf-417; C.2.19 Pdf-417 - Psion Teklogix Omnii XT10 User Manual

Appendix C: Bar Code Settings
Decoded (Internal) Scanners
PDF-417
A composite symbol includes multi-row 2D components making it compatible with linear
and area CCD scanners along with linear and rastering laser scanners. The options available
for this parameter represent multi-level components of a composite symbol.
Enable CC-C and Enable CC-AB
To activate these components, set the parameters to on.
Enable TLC-39
This composite component integrates MicroPDF417 with the linear code. Setting this pa-
rameter to on enables this parameter.

C.2.19 PDF-417

Enabled
Setting this parameter to on enables PDF-417 two dimensional (2D) coding.
Length Restriction
Refer to "Length Restriction" on page C-14 for details.
Add/Remove Data
Refer to "Add/Remove Data" on page C-14 for details.
C.2.20 Micro PDF-417
Enabled
Setting this parameter to on enables "2D Micro PDF-417" bar code scanning. Micro PDF-
417 is a multi-row symbology that is useful for applications requiring greater area efficiency
but lower data capacity than PDF-417.
Code 128 Emulation
When this parameter is enabled, the scanner transmits data from certain Micro PDF-417
symbols as if it was encoded in Code 128 symbols.
If Code 128 Emulation is enabled, the following Micro PDF-417 symbols are transmitted
with one of the following prefixes:
]C1 if the first codeword is 903-907, 912, 914, 915
]C2 if the first codeword is 908 or 909
]C0 if the first codeword is 910 or 911
C-24 Psion Teklogix Omnii XT10 Hand-Held Computer User Manual