Desktop Docking Stations - Models St4002 And St4003 - Psion Teklogix Omnii XT10 User Manual

Chapter 6: Peripheral Devices & Accessories

Desktop Docking Stations - Models ST4002 and ST4003

Figure 6.7 Vehicle Power Outlet Adaptor
• Attach the USB Adaptor to the base of the hand-held. Refer to "Snap Modules" on
page 177 if you require further details.
• Insert the DC power plug on the Vehicle Power Outlet Adaptor into the DC IN port on
the USB adaptor.
• Insert the Vehicle Power Outlet Adaptor plug into automotive power outlet in your
vehicle.
Note: Battery charging continues whether the hand-held is switched on or off.
6.7

Desktop Docking Stations - Models ST4002 and ST4003

Omnii can be inserted into two desktop docking stations which are designed to charge
the battery installed in the hand-held along with a spare battery pack: Models ST4002
and ST4003.
Important: These docking stations can only be used to charge Psion Teklogix approved
The ST4002 and ST4003 desktop docking stations feature:
• Fast charging of the internal battery.
• Fast charging of the spare battery pack.
• A Host USB port to connect peripherals such as a printer, keyboard, etc.
• A Client USB port to connect the docking station to a PC.
Note: The ST4002 desktop dock can be upgraded to include the DE9M and RJ45 inter-
faces by using the ST4100 Xmod (Expansion Module).
180 Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
DC Power Plug
lithium-ion batteries.
Adaptor Plug