C.5.3 Code 128 - Psion Teklogix Omnii XT10 User Manual

• Double-tap on MOD Checks to display your options.
• Tap on a check digit to highlight it, and tap on OK.
If you choose None, a check is not executed.
Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the decoded
symbol.
Length Restriction
Refer to "Length Restriction" on page C-14 for details.
Add/Remove Data
Refer to "Add/Remove Data" on page C-14 for details.
C.5.3 Code 128
Enabled
Set this parameter to on to enable "Code 128".
Include Sym
Setting "Include Sym" to on causes the group separator(s) and start code contained in this
type of bar code to be displayed on the screen.
Note: This option is available only when 'EAN/UCC 128' is selected.
Variations
When using Code 128, you can choose the bar code variation the scanner will recognize.
The options available are Standard, UCC 128 and EAN/UCC 128.
• Double-tap on Variations to display a dialog box listing your options.
• Tap on a variation to highlight it, and then tap on OK.
If you choose None, a check is not executed.
Standard
Enable Standard if "Code 128" is desired.
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Non-Decoded Scanners
Code 128
C-57