D.5.14 Interleaved 2 Of 5 - Psion Teklogix Omnii XT10 User Manual

Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths – 1 to 80.

D.5.14 Interleaved 2 of 5

Enabled
Set this parameter to on to enable "Interleaved 2 of 5".
Check Char
When this parameter is set to on, the integrity of a "Interleaved 2 of 5" symbol is checked to
ensure that it complies with specified algorithms.
Check Char Strip
If you enable this parameter, a check character is stripped from the decoded bar code data.
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths – 2 to 80.
D.5.15 Matrix 2 of 5
Enabled
Set this parameter to on to enable "Matrix 2 of 5".
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths – 1 to 80.
D.5.16 IATA 2 of 5
Enabled
Set this parameter to on to enable "IATA 2 of 5".
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Appendix D: Teklogix Imagers Applet
Bar Code Symbologies – Descriptions
Interleaved 2 of 5
D-33