Psion Teklogix Omnii XT10 User Manual page 167

• Press and hold on a symbology (e.g., Code 128) to display a pop-up menu.
• Choose Default subtree to reset only the parameters in the symbology you selected, or
choose Default all settings to reset all scanner parameters to default settings.
To reset a single parameter to its default setting:
• Press and hold on the parameter you want to reset.
• Choose Default parameter to reset the parameter to the default setting.
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Chapter 5: Configuration
Bar Codes Tab
151