Assigning An Ip Address; Name Server; Advanced Features; Rearranging Preferred Networks - Psion Teklogix Omnii XT10 User Manual

Appendix B: Wireless Zero Config

Assigning An IP Address

B.2

Assigning An IP Address

If your network is not using a DHCP server, you will need to assign an IP address. Refer to
"IP Address" on page 26 for details about assigning an IP address.
B.2.1

Name Server

Refer to "Name Server" on page 28 for details about this option.
B.3

Advanced Features

To display the Advanced Wireless Settings dialog box:
• Tap on the Advanced button in the Wireless Information tab. (Refer to Figure B.4.)
This window lists the available preferred networks.
Figure B.6 Advanced Settings
B.3.1

Rearranging Preferred Networks

Omnii attempts to connect with the networks listed in this dialog box in sequence, beginning
at the top of the list. If you need to rearrange this list of networks—move networks up and
down in the list:
• Tap in the Networks List, and highlight the network that you want to move up or down
in the list.
• To move the highlighted item in the list upward or downward, tap on the Up or Down
button.
B-8 Psion Teklogix Omnii XT10 Hand-Held Computer User Manual