1. Basic Preparation
Important:
It is important that you review all safety guidelines
described under "Lithium-Ion Battery Safety Precau-
tions" on page 8 before charging a battery.
This quick start guide provides basic information on the operation
and features of the Psion Teklogix 7530 G2 Hand-Held Computer.
For more detailed information, refer to the 7530 G2 Hand-Held
Computer User Manual, or the documentation supplied with the
application you are using.
Typically, 7530 G2 hand-helds are configured at the factory and
arrive ready for use. Although the 7530 G2 is equipped with an
internal Compact Flash and SD I/O slot, these slots are not intended
for user modification. If a device needs to be changed or added in
these slots, contact qualified Psion Teklogix personnel.
1.1 Charging The Battery
Batteries shipped from the factory are not charged. They must be
fully charged prior to use. Full capacity may not be reached until at
least 5 full charge/discharge cycles have been performed.
Psion Teklogix 7530 G2 Hand-Held Computer Quick Reference Guide
17