Psion Teklogix Omnii XT10 User Manual page 153

Once you've edited this dialog box to reflect your network carrier requirements, press
[ENTER] to save your changes.
13. At this point, return to the Control Panel, and choose the Network and Dial-up
Connections icon.
14. In the network connection window, the new network configuration—in this case,
New Connection is displayed. Tap on the new icon.
When you tap on your new connection, an onscreen message indicates the status of your
connection: connected, disconnected, error messages, and so on.
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Chapter 5: Configuration
The Bluetooth GPRS WAN Connection
137