Using Microsoft Activesync; Using Windows Mobile Device Center - Psion Teklogix Omnii XT10 User Manual

2.10.1 Using Microsoft ActiveSync

Note: If you use a serial port to connect devices like Omnii to your desktop computer, the
connection may not succeed because ActiveSync has trouble connecting at non-
default baud rates.
To work around this problem, set the ActiveSync baud rate on the desktop to use the
same baud rate as the device. You can set the baud rate by editing the registry on the
desktop host computer, as detailed in the steps outlined at the following website:
http://support.microsoft.com/kb/324466
To install ActiveSync, follow the step-by-step instructions provided with the program's
setup wizard. Refer to the following website for details:
http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx

2.10.2 Using Windows Mobile Device Center

If you are running Windows Vista or Windows 7, your data transfers do not require Active-
Sync. Instead, you will need to download Windows Mobile Device Center. Refer to the
instructions at the following website
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
To transfer data between your PC and your hand-held:
• Tap on Start>Computer to display the drives. Omnii will be visible here.
• Open drives, files and folders as you would on your PC.
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Chapter 2: Basic Operation

Using Microsoft ActiveSync

31