Bar Code Decoding Camera Predefined Presets; Image Capture Predefined Presets - Psion Teklogix Omnii XT10 User Manual

Linear and PDF417
This preset enables the decoding of all the 1D and PDF symbologies that the imager can
decode.
Matrix
This preset enables the decoding of all 2D symbologies that the imager can decode.
Postal
This preset enables the decoding of all the postal symbologies that the imager can decode.
D.2.3

Bar Code Decoding Camera Predefined Presets

The following presets enable successful bar code image capture in almost all conditions.
Note: It is recommended that the default preset be used whenever possible.
Default
This preset works in a wide range of conditions. It is optimized for a normal office lighting
(about 300 Lux).
Low light
This preset is designed for very dark conditions such as inside a warehouse where the lights
are kept low, or inside an unlit truck. This preset increases either the exposure time or the
gain.
Low power
This preset minimizes the use of the flash so as to conserve the battery power on the hand-
held.
Glossy surface
This preset minimizes the use of the flash so as to reduce reflection. This preset is used to
read bar codes that are behind glass, or inside the plastic window of an envelope.
D.2.4

Image Capture Predefined Presets

The following presets enable successful image capture in almost all conditions.
Note: It is recommended that the default preset be used whenever possible.

Bar Code Decoding Camera Predefined Presets

Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Appendix D: Teklogix Imagers Applet
D-7