The Keypad Backlight - Psion Teklogix Omnii XT10 User Manual

The examples below illustrate how to access A, B and C, all of which are printed in blue
characters above the numeric key [2]. The letters you choose appear in the softkey bar as
you press the numeric key, providing a visual indicator of which letter will be displayed on
the screen.
To choose the letter 'a':
• Press the [FN] key, and press the numeric key [2].
• Press the [FN] key again to unlock or turn it off.
To choose the letter 'b':
• Press the [FN] key, and press [2] twice.
• Press the [FN] key again to unlock or turn it off.
To choose the letter 'c':
• Press the [FN] key, and press [2] three times.
• Press the [FN] key again to unlock or turn it off.
Note: Keep in mind that there is a timeout of one second between key presses when
sequencing through the alphabetic characters on a key. If you pause longer than
one second between key presses, the alphabetic character that is displayed at that
time will be entered.
Selecting Uppercase Letters
To display a single capital letter, press the [SHIFT] key first, then the letter you want.
To access CAPS LOCK mode, press [FN] + [SHIFT]. In this state, if you press a numeric
key, the number is displayed rather than the normal shifted function of that key. Press [FN] +
[SHIFT] again to turn the CAPS LOCK mode off.
3.2.5

The Keypad Backlight

The intensity of the keypad backlight and the conditions under which this backlight is acti-
vated can be configured using the Keyboard icon in the Windows Embedded CE Control
Panel. The behaviour of the keypad backlight is tailored in the Keyboard Properties dialog
box. Refer to "Keyboard Backlight" on page 95 for details about this option.
Note: Keep in mind that this option may be restricted to supervisory use only.
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Chapter 3: Getting To Know Your Omnii

The Keypad Backlight

43