Basic Preparation; Charging The Battery; Installing The Battery - Psion Teklogix Workabout Pro Quick Start Manual

1. Basic Preparation

Important:
All approval and safety information is outlined in the
'WORKABOUT PRO Hand-Held Computer User Manual'
– part number 8000024. This manual is available on our
web site www.psionteklogix.com through the Teknet
extranet. It is important that you review all safety guidelines
before charging a battery or operating a scanner.
This quick start guide provides basic information on the operation
and features of the Psion Teklogix WORKABOUT PRO M (Mono-
chrome) and WORKABOUT PRO C (Colour) Hand-Held Compu-
ter. For more detailed information, refer to the WORKABOUT PRO
M/C Hand-Held Computer User Manual (PN 8000024) or the docu-
mentation supplied with the application you are using.
Typically, WORKABOUT PROs are configured at the factory and
arrive ready for use.

1.1 Charging The Battery

Batteries shipped from the factory are not charged. They must be
fully charged prior to use. Full capacity may not be reached until at
least 5 full charge/discharge cycles have been performed.

1.2 Installing The Battery

• Turn the fasteners at the base of the battery cover counter-
clockwise to unlock the cover and remove it. The top of the
stylus is shaped to help you loosen the fasteners.
• Insert the charged battery. Replace the battery cover, and turn
the fasteners at the base of the battery cover clockwise to lock
the battery in place.
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 3