Chapter 5: Configuration
Teklogix Scanners
5.12
Teklogix Scanners
The Teklogix Scanners icon in the Control Panel provides dialog boxes in which you can
tailor bar code scanner configuration and choose the bar codes your scanner will recognize.
The parameters are preset with the default settings of the decoded scanner installed in
the unit.
Note: To enable a newly-installed scanner, press and hold down the [FN] key and the
[ENTER/Power] key simultaneously for a minimum of three seconds.
For a listing of available scanners and their specifications, please refer to Chapter 7:
"Specifications".
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
149