Psion Teklogix Omnii XT10 User Manual page 235

Figure B.4 Wireless Information Tab
This tab lists available networks—any access points that are broadcasting an SSID, and it
lists preferred networks—networks that you have configured. Since access points are gener-
ally secure, they will most likely not be listed here. By default, Omnii attempts to connect to
preferred networks. This behaviour can be changed by enabling Automatically connect to
non-preferred networks in the Advanced dialog box (see Figure B.6).
• To add a new configuration, tap on the Add New button. A blank Wireless Properties
dialog box is displayed.
Wireless Properties
• Type the appropriate SSID (Service Set Identifier) in the Network name (SSID): dialog
box. The Network name field can contain a maximum of 32 characters. The name
assigned here is listed as a preferred network.
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Appendix B: Wireless Zero Config
Wireless Information Tab
B-5