Options; C.5.1 Options - Psion Teklogix Omnii XT10 User Manual

All the available bar code symbologies for this type of scanner can be selected in this tab.
A 'plus' sign (+) to the left of the menu item indicates that a sub-menu of parameters is
attached.
• Tap on the + sign to display the sub-menu.
• To change a parameter value, double-tap on the parameter. If you need to type a value, a
dialog box is displayed in which you can type a new value. If you need to change a yes
or no value, double-tapping on the parameter toggles between yes and no.
If you're using the keyboard:
• Highlight the bar code you want to work with, and press the [RIGHT] arrow key to
display the sub-menu.
• Use the [UP] and [DOWN] arrow keys to highlight a parameter.
• To change a parameter value, press [SPACE] or the [RIGHT] arrow key. If a field
requires text entry, a text box is displayed in which you can enter the appropriate value.
C.5.1

Options

• Tap on the + sign next to Options to display these parameters.
Dot Time (msec)
The value selected for "Dot Time (msec)" determines (in milliseconds) how long the target-
ing dot remains on before the scanner switches to a normal scan sweep. When you double-
tap on this parameter, a dialog box is displayed in which you can enter a value from 0 to
3000. A value of 0 (zero) disables the target dot.
Short Code
When enabled, this parameter allows scanning of short I 2 of 5 bar codes (2 characters).
When disabled, these short bar codes are rejected.
Enabling "Short Code" may reduce the robustness of the decoding since the hand-held must
decode more potential bar codes; it is therefore not recommended for general-purpose bar
codes with 4 or more characters.
Verify
The value entered for this parameter determines the number of correct additional decodes re-
quired after the initial decode, prior to a bar code being accepted. Higher values significantly
increase the time it takes to decode a bar code but also improve the reliability of the decoded
bar code.
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Non-Decoded Scanners

Options

C-55