Using The Teklogix Imagers Applet; Configuring The Image Capture Presets - Psion Teklogix Omnii XT10 User Manual

Appendix D: Teklogix Imagers Applet

Using the Teklogix Imagers Applet

Default
This preset works in a wide range of conditions. It is optimized for a normal office lighting
(about 300 Lux).
Motion
This preset uses a shorter exposure time so as to freeze motion.
Low light near
This preset is designed for dark conditions, it uses a longer exposure time and includes
the flash.
D.3

Using the Teklogix Imagers Applet

D.3.1

Configuring the Image Capture Presets

To configure the image capture presets, open the dialog box as follows:
• Tap on Start>Settings>Control Panel.
• Tap on the Teklogix Imagers icon, and if it's not already selected, tap on the
Imaging tab.
The following screen is displayed.
D-8 Psion Teklogix Omnii XT10 Hand-Held Computer User Manual