Mode Tab - Psion Teklogix Omnii XT10 User Manual

Chapter 5: Configuration

Mode Tab

OBEX OPP server enables the Object Push Profile server. A warm reset must be performed
on Omnii after a change is made to this option. The OPP Server allows other Bluetooth
devices to send files to this device.
• Tap on the checkbox to activate the server.
5.6.4

Mode Tab

Turn on Bluetooth activates the Bluetooth radio.
Discoverable determines whether Omnii is visible or invisible to other devices.
Printer Port allows you to assign and enable a virtual outgoing COM port selected from the
drop-down menu to communicate with a paired Bluetooth printer. Keep in mind that when a
port is chosen, the printer must be on and connected to the chosen port for a remote device to
be able to connect.
• Select a port within the Printer Port drop-down list, e.g. BSP1:
• Check the Printer Port check box.
• Open the Device tab and tap on Scan.
• Tap-and-hold each Bluetooth Printer device entry and then select Pair, key-in the Pass-
code (if needed) and then tap Done. DO NOT select any services!
• Close the Bluetooth Manager.
• Select the Bluetooth device to print to—you will need to key-in (or programmatically
raise) the following key sequence [CTRL] [ALT] [F1] .
• You can now select the Bluetooth device to which you wish to print.
132 Psion Teklogix Omnii XT10 Hand-Held Computer User Manual