•
Next, choose the profile Type you want to create:
- ManualRestore – creates a backup that is manually restored by the operator.
- AutoRestore – creates a profile that automatically restores itself following a cold reset
or a clean reset.
•
Finally, if you want to choose another location for your backup file (optional), tap on the
[...] button to the right of the Profile Location field.
Important: Any profile not stored in persistent memory (flash disk, external usb drive)
will be erased during a clean boot, therefore you should store profiles on a
persistent drive.
When performing an autorestore, the program only searches for profiles
located in the root folder of persistent drives. If you store your profile any-
where else it will not be restored.
When there are multiple autorestore profiles found, only the latest is
restored.
•
Navigate to the new location, and tap on OK to save it.
•
Tap on the (Next) button.
Defining the Type of Backup
Default Backup
Default Backup is selected so that all installed or copied files, database entries, and the Reg-
istry are saved. Choose Advanced Backup if you want to tailor your backup.
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Chapter 5: Configuration
Creating a Backup Profile
161