C.5.9 Code 93 - Psion Teklogix Omnii XT10 User Manual

Appendix C: Bar Code Settings
Non-Decoded Scanners
Code 93
Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the decoded
symbol.
Length Restriction
Refer to "Length Restriction" on page C-14 for details.
Add/Remove Data
Refer to "Add/Remove Data" on page C-14 for details.
C.5.9 Code 93
Enabled
Set this parameter to on to enable "Code 93".
Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the decoded
symbol.
Length Restriction
Refer to "Length Restriction" on page C-14 for details.
Add/Remove Data
Refer to "Add/Remove Data" on page C-14 for details.
C.5.10 Code 11
Enabled
Set this parameter to on to enable "Code 11".
Include Check
If "Include Check" is enabled, the check digit is included with the decoded bar code data.
Check Digits
This parameter can be set to None, One Check Digit or Two Check Digits.
• Double-tap on this parameter to display a dialog box listing your options.
C-62 Psion Teklogix Omnii XT10 Hand-Held Computer User Manual