Table of Contents
Advertisement
2.4 Mounting
2.4.1
Wall mounting
Besides desktop installation, the industrial switch is specially designed to hang on the
wall for space-constrained environments. The drawing below illustrates the wall-
mounting installation to hang the switch on the wall via four mounting holes on the
sides.
Hang the switch
on the wall
Attention
To earth the switch to ground with the grounding lug, please prepare an
M8 wrench to hold the grounding contact from rotating when you are
trying to tighten or release the fixing screw above the contact.
EKI-6558TI_EKI-6559TMI_Manual_ed2
Grounding
Contact
Figure 2.5: The illustration for Wall-mounting
16
Advertisement
Table of Contents
