Figure 2.5 Securing Wall Mounting Screws; Figure 2.6 Wall Mount Installation - Advantech EKI-8500 Series User Manual

10. Insert the screws into the wall sinks. Leave a 2 mm gap between the wall and
the screw head to allow for wall mount plate insertion.
4.5 mm
3.0 mm

Figure 2.5 Securing Wall Mounting Screws

Note! Make sure the screws dimensions are suitable for use with the wall

mounting plate.
Do not completely tighten the screws into the wall. A final adjust-

ment may be needed before fully securing the wall mounting plates
on the wall.
11. Align the wall mount plate over the screws on the wall.
12. Install the wall mount plate on the screws and slide it forward to lock in place,
see the following figure.
13. Once the device is installed on the wall, tighten the screws to secure the device.
1
2
1

Figure 2.6 Wall Mount Installation

14
2.0 mm
EKI-8500 Series User Manual