4.10
Diagnostics
Through the Diagnostics function configuration of settings for the switch diagnostics
is available.
4.10.1
Cable Diagnostics
The Cable Diagnostics page allows you to select the port for applying a copper test.
To access this page, click Diagnostics > Cable Diagnostics.
The following table describes the items in the previous figure.
Item
Port
Copper Test
The ensuing table for Test Result settings are informational only: Port, Channel A,
Cable Length A, Channel B, Cable Length B, Channel C, Cable Length C, Channel D
and Cable Length D.
4.10.2
Ping Test
The Ping Test page allows you to configure the test log page.
To access this page, click Diagnostics > Ping Test.
Figure 4.208 Diagnostics > Cable Diagnostics
Description
Click the drop-down menu to select a pre-defined port for diagnostic
testing. Giga ports are displayed with a channel A to D designation.
Click Copper Test to display the test result for the selected port.
Figure 4.209 Diagnostics > Ping Test
136
EKI-7720 Series User Manual