M
S
ANAGING
WITCH
4.10. Diagnostics
Through the Diagnostics function configuration of settings for the switch diagnostics is
available.
4.10.1 Cable Diagnostics
The Cable Diagnostics page allows you to select the port for applying a copper test.
To access this page, click Diagnostics > Cable Diagnostics.
The following table describes the items in the previous figure.
Table 4-102. Diagnostics > Cable Diagnostics
Item
Port
Copper Test
The ensuing table for Test Result settings are informational only: Port, Channel A, Cable
Length A, Channel B, Cable Length B, Channel C, Cable Length C, Channel D and Cable
Length D.
131
Figure 4-104. Diagnostics > Cable Diagnostics
Click the drop-down menu to select a pre-defined port for diagnostic
testing. Giga ports are displayed with a channel A to D designation.
Click Copper Test to display the test result for the selected port.
Description