Rate Limit; Figure 4.96 Qos > Rate Limit > Ingress Bandwidth Control - Advantech EKI-7706 Series User Manual

Item
Trust State
Apply
The ensuing table for QoS Port Status lists the following settings (informational
only):
Port and Trust State
4.8.3

Rate Limit

Rate Limits features control on a per port basis. Bandwidth control is supported for
the following: Ingress Bandwidth Control, Egress Bandwidth Control and Egress
Queue.
4.8.3.1 Ingress Bandwidth Control
The Ingress Bandwidth Control page allows you to configure the bandwidth control
for a listed port.
To access this page, click QoS > Rate Limit > Ingress Bandwidth Control.
Figure 4.96 QoS > Rate Limit > Ingress Bandwidth Control
The following table describes the items in the previous figure.
Item
Port
State
Rate (Kbps)
Apply
The ensuing table for Ingress Bandwidth Control Status lists the following settings
(informational only):
Port and Ingress Rate Limit (Kbps)
EKI-7706 Series User Manual
Description
Select Enabled or Disabled to set the port's trust state status.
Click Apply to save the values and update the screen.
Description
Enter the port number for the rate limit setup.
Select Disabled or Enabled to set the port's state status.
Enter the value in Kbps (16 to 1000000) to set as the bandwidth rate
for the selected port.
Click Apply to save the values and update the screen.
99