Figure 4.29 Storm Policer Configuration - Advantech EKI-8500 Series User Manual

Item
VID
PCP
DEI
Frame Type
Action
Modification Buttons Click an option to modify the selected QCE (QoS Control Entry) entry.
4.3.4.14 Storm Policing
This storm policers for the switch are configured on this page. There is a unicast
storm policer, multicast storm policer, and a broadcast storm policer, only for flooded
frames, i.e. frames with a (VLAN ID, DMAC) pair not present in the MAC Address
table.
1. Navigate to Configuration > QoS and click Storm Policing.
The Storm Policer Configuration page displays.
The following table describes the items in the Global Storm Policer Configuration
figure.
Item
Frame Type
Description
Indicates (VLAN ID), either a specific VID or range of VIDs (range 1 to
4095 or Any).
Indicates the Priority Code Point. Single values, a range, or Any are
displayed.
Indicates a Drop Eligible Indicator. Values: 0, 1 or Any.
Indicates the type of frame. Possible values are:
 Any: Match any frame type.
Ethernet: Match EtherType frames.

 LLC: Match (LLC) frames.
 SNAP: Match (SNAP) frames.
IPv4: Match IPv4 frames.

 IPv6: Match IPv6 frames.
Indicates the classification action taken on ingress frame if
parameters configured are matched with the frame's content.
Possible actions are:
CoS: Classify Class of Service.

 DPL: Classify Drop Precedence Level.
 DSCP: Classify DSCP value.
PCP: Classify PCP value.

 DEI: Classify DEI value.
 Policy: Classify ACL Policy number.
Ingress Map: Classify Ingress Map ID.

Options:
 Insert: Inserts a new QCE before the current row.
Edits: Edits the QCE.

Move Up: Moves the QCE up the list.

 Move Down: Moves the QCE down the list.
Delete: Deletes the QCE.

Add to End of List: The lowest plus sign adds a new entry at

the bottom of the QCE listings.

Figure 4.29 Storm Policer Configuration

Description
Display the frame type for which the configuration below applies.
56 EKI-8500 Series User Manual