Engine Remounting - Suzuki GN125F Service Manual

ENGINE REMOUNTING

The engine can be mounted in the reverse order of removal.
Temporarily fasten the engine mounting bracket before
inserting the engine mounting bolts.
:
NOTE
The engine mounting nuts are self-lock nuts. Once the nut
has been removed, it is no longer of any use. Be sure to
use new nuts and tighten them to the specified torque.
Tightening torque for engine mounting bolts:
Engine mounting nut
Engine lower hanging nut
Swing arm nut
D
Muffler bolt
Install the drive chain and drive chain clip
Align the release arm slit surface with the notch mark on the
release cam shaft.
After installing the engine, pour the engine oil into the
engine. (Refer to page 2-7)
Inspect the oil level. (Refer to page 2-7)
Inspect the throttle cable (page 2-9)
Inspect the clutch cable
Inspect the idling speed
Inspect the drive chain
A
: 33-39 N•m
: 22-33 N•m
B
:50-80 N•m
C
:11-15 N•m
(page 2-8)
(page 2-8)
(page 2-10)
ENGINE
.
1
3-5
D
Notch mark
Slit