Radio Key Programming - Ness D8xD Installer Manual

ness rADio
eXTRA
OPTIONS
User CoDe
MODe
oPtions tAble
(exclude light
is on).
5e
User oPtion
raDio CoDe
CoDe no.
1 P201e
(Master)
2 P202e
3 P203e
4 P204e
5 P205e
6 P206e
7 P207e
8 P208e
9 P209e
10 P210e
11 P211e
12 P212e
13 P213e
14 P214e
15 P215e
16 P216e
17 P217e
18 P218e
19 P219e
20 P220e
21 P221e
22 P222e
23 P223e
24 P224e
25 P225e
26 P226e
27 P227e
28 P228e
29 P229e
30 P230e
31 P231e
32 P232e
33 P233e
34 P234e
35 P235e
36 P236e
37 P237e
38 P238e
39 P239e
40 P240e
41 P241e
42 P242e
43 P243e
44 P244e
45 P245e
46 P246e
47 P247e
48 P248e
49 P249e
50 P250e
51 P251e
52 P252e
53 P253e
54 P254e
55 P255e
56 P256e
74
radio Keys
100–067 rK4
106–167 rK4B
106–299 rK4P
106-178 rK3+1
rADio CoDes
each of the 56 User Codes, except for the Master Code, can be programmed to
be Radio Codes. This allows up to 55 Ness Radio Keys to be used for Arming and
Disarming of the panel. The Ness RKP Radio Keypad can also be used with the
D8/D16, (see the RKP installer manual). The optional 100–200 Ness Radio Interface is
required for radio operation.
PROGRAMMING RADIO KeyS
Use the extra Options programming mode to enable selected user codes as Radio
Codes. When a user code is enabled as a Radio Code, its Keypad Code, (if any), is
automatically deleted.
PROGRAMMING SeQUeNCe:
In Installer Program Mode, enter the option number for the user code which

will be become a radio code.
Press eXClUDe e to enter extra Options mode. (The exclude light is on).

Press 5e to enable that user code as a Radio Code. (light 5 is on).

 Press eXClUDe e to exit extra Options mode. (The exclude light is off).
Press 1e

the reaDY light will turn on to indicate that the user Code is ready to accept the radio Key.
if a code is already programmed the reaDY light will not turn on and a warning beep will sound. to
clear the code, press 0e, then go back to step 5. (0e clears any existing codes).
 Press the OFF button on the Radio Key to be programmed
if the radio Key is accepted, the reaDY light will turn off and 3 beeps will sound.
if the reaDY light stays on and a warning beep sounds, the radio Key is already assigned to another
user Code and must be cleared from that user Code first.
eXAMPle: To enable User Code 56 as a Radio Code and program a Radio Key.
In Installer Program Mode.
Press P256e exClUDe e 5e exClUDe e 1e then press
Radio Key.
P201e – P256e
ProgrAm moDe leVel:
FACtory DeFAUlt:
code are keypad codes.
notes
• User Code 1 (Master Code) is always a
Keypad Code.
• Radio Codes can be deleted by keypad
in the case of a lost Radio Key.
• Radio Keys are assigned to User Codes,
so that Open/Close reports are identified by
user number when the control panel is base
station monitored. (If Open/Close reports
are enabled)
relAteD oPtions
P101e–P116e Programming Radio Devices.
NeSS D8X / D16X DelUXe CONTROl PANel – INSTAllATION MANUAl
100–001
ness rKP
radio Keypad
(example, enter P256e for user code 56).
Installer.
No Radio Codes, all
the OFF button on the
TO DeleTe A RADIO CODe:
Any Radio Code can be deleted
if necessary, (lost radio key or if
programming a radio key over
an old one). And a Radio Code
is automatically deleted when
the user code type is changed to
keypad code or reader code.
eXAMPle: To delete Radio
Code 56.
In Installer Program Mode: Press
P256e 0e