Misc. Options - Ness D8xD Installer Manual

P68e 4e
Available in D8x/D16x V6 and later.
ProgrAm moDe leVel
Installer mode or NessComms.
FACtory DeFAUlt
OFF: OK/ReADy ignores delay zones.
P68e 5e
ProgrAm moDe leVel
Installer mode or NessComms.
FACtory DeFAUlt
OFF: Radio Key siren warning disabled.
notes
Unsealed zone warning is inactive if
P64e 4e Arm/Disarm Chirps is enabled
regardless of the status of P68e 5e.
P68e 6e
ProgrAm moDe leVel
Installer mode or NessComms.
FACtory DeFAUlt
OFF: No 24hr Fire siren sound.
P68e 7e
Available in D8x/D16x V6 and later.
ProgrAm moDe leVel
Installer mode or NessComms.
FACtory DeFAUlt
OFF: Strobe Flash on very ARM signal.
P68e 8e
ProgrAm moDe leVel
Installer mode or NessComms.
FACtory DeFAUlt
OFF: Quiet Chirps disabled.
relAteD oPtions
P64e 4e Radio Key Chirps.
P69e 5e Home Arm by Radio Key.
P120e 2e Home Arm chirps.
P120e 3e Radio Key AUX / arms Home
Monitor
P162e Chirp Siren Volume
"ok/reADy" DisPlAy oPtion
When the option of OFF, the OK/ReADy icon will display even if entry Delay zones are
unsealed. This is useful in cases where the keypad location is covered by a PIR with
entry delay.
When this option is ON, all zones including entry Delay zones must be sealed for the
keypad/s to display the OK/ReADy icon.
PROGRAMMING SeQUeNCe:
P68e 4e toggles the option ON and OFF
oFF: oK/reaDY ignores delay zones (default)
on: oK/reaDY senses all zones
rADio key Arming, UnseAleD Zone WArning
Setting this option ON allows a 2 second SIReN warning if there is an unsealed zone in
an Area Armed by a Radio Key.
PROGRAMMING SeQUeNCe:
P68e 5e toggles the option ON and OFF
oFF: radio Key arming, siren warning disabled
on: radio Key arming, siren warning enabled
24Hr Zone Fire siren soUnD
This option changes the siren sound when a 24hr zone is triggered. The keypad key
sequence for FIRe (3 e) always outputs the FIRe siren sound.
PROGRAMMING SeQUeNCe:
P68e 6e toggles the option ON and OFF
oFF: Fire siren sound disabled
on: Fire siren sound enabled
single sHot strobe on Arming
This option provides a choice of operation for the strobe flash when arming by a Radio
Key.
When this option is OFF the strobe will flash very time an ARM signal is received from a
valid Radio Key. If the panel is armed any subsequent ARM signals will flash the strobe
light. The panel will not change state because it already armed.
When this option is ON the strobe will flash only when the panel arms. Any subsequent
ARM signals will be ignored.
PROGRAMMING SeQUeNCe:
P68e 7e toggles the option ON and OFF
oFF: Strobe flashes on every arM signal
on: Single Shot Strobe flashes only on panel arming
QUiet CHirPs on Arm/DisArm
This quietens the siren chirps that are made whenever keyswitch or radio key Arming
or Disarming is used.
(Arm/Disarm Chirps must be enabled at P64e 4e).
PROGRAMMING SeQUeNCe:
P68e 8e toggles the option ON and OFF
oFF: Quiet Chirps disabled
on: Quiet Chirps enabled
NeSS D8X / D16X DelUXe CONTROl PANel – INSTAllATION MANUAl
P r o g r A m m i n g
35